Hi, such a problem, the laptop after an unsuccessful firmware update, the dump was dirty, I flashed the dump (from the offsite), the laptop turns on and the battery charges everything seems OK, but if the power supply and battery are connected at once, then the touchpad freezes and the OS loads long time, but if you work only from the battery or only from the power supply then everything is fine and fast, and there is also a problem that when you disconnect rtc and turn off all power, the asus boards should have an auto turn on, but it does not... also, if you turn on the laptop from the button with the battery and power supply connected, the laptop initializes for a long time, 3-4 minutes, but when I turned off the power supply, instant initialization and loading OS. I tried to flash the ec directly, but the problem remained... I think that maybe the trouble with the chargerIC or with ec.