came as a dead board
would only power on battery
found a shorted cap and replaced.( marked in red)
i have found I am mising 20v on the mosfets.. (marked in red)
I only have 5v across these
bit stuck where to go from here
the error message is
The connected AC adapter has a lower wattage than the recommended mode
shows up as 15w charger in windows
its a strange thunder bolt issue i think, the shorted cap threw me a bit.
schematics are here https://www.badcaps.net/forum/showthread.php?p=1146770
would only power on battery
found a shorted cap and replaced.( marked in red)
i have found I am mising 20v on the mosfets.. (marked in red)
I only have 5v across these
bit stuck where to go from here
the error message is
The connected AC adapter has a lower wattage than the recommended mode
shows up as 15w charger in windows
its a strange thunder bolt issue i think, the shorted cap threw me a bit.
schematics are here https://www.badcaps.net/forum/showthread.php?p=1146770
Comment