Hp 250 g7 (gpi52 la-j951p) no display

[arber1232]

Hi There,

I have HP 250 G7 (GPI52 LA-J951P) that has a 5.3 caps blink code
laptop not turn on before i find problem has pqz2(6930 i replace with 6932 ) in shorts i change this mosfet laptop now turn on but no display error code 5 long and 3 shorts blink in caps lock . I try to reflash bios but is same error can i help me ???

[ACS-Repair]

Re: Hp 250 g7 (gpi52 la-j951p) no display

This is what HP says...

"The red light blinks five times, and then three, short white light blinks
This condition indicates the embedded controller cannot reach the BIOS within the established time limit."

Disconnect the main battery and/or BIOS battery for at least 30 seconds then reconnect and test again. HP notebooks are known to often come back to life after this simple step.

[arber1232]

Re: Hp 250 g7 (gpi52 la-j951p) no display

i try this but not result.

[Sephir0th]

Re: Hp 250 g7 (gpi52 la-j951p) no display

Maybe you missed the fact that a internal shorted Mosfet related to the CPU (+VCCIN) almost always results in a dead CPU. Game Over.