IDEAPAD NM-D031 MB with 10 second boot cycle

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • coltron
    Senior Member
    • Jan 2021
    • 98
    • England

    #1

    IDEAPAD NM-D031 MB with 10 second boot cycle

    Hi got a recent liquid damaged Ideapad 3 with tenth gen i5 has the DO31 MB. I've done some work but its stumping me.

    mb has been alcohol cleaned and button board replaced where most of the liquid went...( a little on keyboard flax connector but cleaned up well.

    Main Problem:-

    The laptop starts and switches off in repeating 10 second cycles.?
    No fan starting.

    Their are no obvious signs of damage and pl's and caps have been checked for direct shorts?

    Battery charges fine.

    I've measured resistance and voltage on pl,s before and during start-up and:-

    3v PL1101 is 360 ohm and around 3.2v
    5v PL1601 is 361 ohm and 4.2v.
    1.8v PL9800 is 304 ohm and 1.2v
    vcc in PL3401 and pl 3400 166ohm and 0v
    vcc aux pl9801 is 370ohm and 0v
    VDDQ PL9802 is 196ohm and 0v
    CHG PL100 is 573ohm and 0.2v battery disconnected

    I,m thinking the problem lies with the 5v rail and the 1.8v, being pulled down but after checking the caps (caps seem good) I've run out of ideas..

    any help greatly appreciated

    Attached Files
    File Type: rar NM-D031.rar (2.92 MB, 0 views)
  • coltron
    Senior Member
    • Jan 2021
    • 98
    • England

    #2
    Re: IDEAPAD NM-D031 MB with 10 second boot cycle

    Update:

    I've removed jumper pj406 5v alw...and the supply voltage is at 5.1v..
    Something after the power supply jumper is pulling the voltage down.

    I've attached board view and schematic for those with quicker skills than myself

    Resistance of the remaining 5v circuit (excluding 5vps) is 496ohm.

    I'm thinking of voltage injection, I've identified several regulators that the 5v goas to as well as the usb ports. but would something dropping 0.8v heat up?

    MOD Edit: Link to schematic and boardview --->
    https://www.badcaps.net/forum/showth...55#post1131955
    Last edited by Vesko356; 08-02-2023, 03:32 AM. Reason: Attached schematic and BV removed and replaced with link.

    Comment

    • Vesko356
      VIP Moderator
      • Aug 2018
      • 4386
      • Bulgaria 🇧🇬

      #3
      Re: IDEAPAD NM-D031 MB with 10 second boot cycle

      Originally posted by coltron

      I've attached board view and schematic for those with quicker skills than myself
      Do not attach laptop schematic and/or BV in this section please!

      Schematic Requests ONLY!
      https://www.badcaps.net/forum/forumdisplay.php?f=41

      Reminder: rules and organization of this section
      https://www.badcaps.net/forum/showthread.php?t=117483
      If you request/offer BIOS/schematics/boardviews, please post in the appropriate subsection, and you can link to it in the troubleshooting topic.
      .
      ----------------------------------------------------------------------------------------------------------------------------------------------------------
      All donations to Badcaps are welcome.
      Become a Badcaps supporter
      >>>>> click on this link to donate <<<<<
      Thanks to all supporters.​
      ----------------------------------------------------------------------------------------------------------------------------------------------------------
      Doctrina est fructus dulcis, radicis amarae.
      .

      Comment

      • coltron
        Senior Member
        • Jan 2021
        • 98
        • England

        #4
        Re: IDEAPAD NM-D031 MB with 10 second boot cycle

        thanks for making me aware

        Comment

        Related Topics

        Collapse

        • meraklinetx
          Asus Z97-a power cycle, no boot no cpu voltage
          by meraklinetx
          Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
          05-10-2023, 06:08 AM
        • Yoda79
          Samsung ue55nu7021k Boot cycle
          by Yoda79
          Hi, wondering if anyone can help with a tv which seems to turn on but turn off soon after and continue to do this cycle over and over again.

          It turns on, no sound and then turns off and starts the whole cycle again. I've opened up the back and can see the backlights turning on. However when I disconnect the two straps connecting the left hard board (as you look on the back of the TV), the boot cycle stops and it does turn on and I can hear the boot up sound, however no video?

          Any thoughts, any help would be greatly appreciated.​...
          06-30-2024, 03:43 PM
        • Document Archive
          Lenovo IdeaPad IdeaPad 3 17ITL6 Notebook 3 Specification for Upgrade or Repair
          by Document Archive
          This specification for the Lenovo IdeaPad IdeaPad 3 17ITL6 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the IdeaPad 3 17ITL6 boardview and IdeaPad 3 17ITL6 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
          09-07-2024, 05:20 AM
        • Document Archive
          Lenovo IdeaPad IdeaPad 3 15IGL05 Notebook 3 Specification for Upgrade or Repair
          by Document Archive
          This specification for the Lenovo IdeaPad IdeaPad 3 15IGL05 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the IdeaPad 3 15IGL05 boardview and IdeaPad 3 15IGL05 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
          09-07-2024, 05:20 AM
        • Document Archive
          Lenovo IdeaPad IdeaPad Gaming 3 15IHU6 Ultrabook 3 Specification for Upgrade or Repair
          by Document Archive
          This specification for the Lenovo IdeaPad IdeaPad Gaming 3 15IHU6 Ultrabook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the IdeaPad Gaming 3 15IHU6 boardview and IdeaPad Gaming 3 15IHU6 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any...
          09-07-2024, 05:20 AM
        • Loading...
        • No more items.
        Working...