hi all, at first the original battery charged up to 50%, they tried the replacement but they damaged the ite8528vg chip, replaced the ite chip, the surface works, but the battery always remains at 100%, also tried another battery,
there is an adapter under the battery flat but it takes well, the surface does not detect the correct percentage and does not activate the charge, mainboard x896569
I have about 3v on the + - connector of the motherboard
battery voltage around 6v, above c it is marked that the battery is at least 7.6v,
advice?
there is an adapter under the battery flat but it takes well, the surface does not detect the correct percentage and does not activate the charge, mainboard x896569
I have about 3v on the + - connector of the motherboard
battery voltage around 6v, above c it is marked that the battery is at least 7.6v,
advice?