Dell optiplex 3000 micro bios

[SMDFlea]

Thank you so much. I have one problem now, Neo Programmer was not able to detect my big bios chip which is mxic mx77l25650fz4i42a. I am using CH431A Tool.

How to add chip support to NeoProgrammer software for the CH341A Programmer https://www.badcaps.net/forum/troubl...41a-programmer

[rex98]

Thank you so much. I have one problem now, Neo Programmer was not able to detect my big bios chip which is mxic mx77l25650fz4i42a. I am using CH431A Tool.

install the driver

[SemmMendrez]

neo programmer

Thank you so much. I have one problem now, Neo Programmer was not able to detect my big bios chip which is mxic mx77l25650fz4i42a. I am using CH431A Tool.

[rex98]

Thank you very much, Rex. One last question. What is the best programming software I can use with CH431A.

neo programmer

[SemmMendrez]

on both there are two bios in that model

Thank you very much, Rex. One last question. What is the best programming software I can use with CH431A.

[rex98]

Good Evening Rex, I'm sorry for being confused. do I need to flash it to one bios chip?

on both there are two bios in that model

[SemmMendrez]

flash both
1st boot, press F2, write service tag, disable Absolute, save, restart. 2nd boot press Alt+F to exit manufacturing mode.

Good Evening Rex, I'm sorry for being confused. do I need to flash it to one bios chip?

[rex98]

Hi everyone. I have a Dell Optiplex 3000 Micro and the issue is device freeze. I have basic knowledge in computer repairing and this is my first time encountering an issue about bios. So, I purchased a cheap bios programmer online which is CH431A. And I don't know if I used the software to get my backup bin file properly.

Service Tag: 4SC6ZS3
Express Service Code: 10420663971
Bios Chip: MXIC MX77L25650FZ4I42A (detected in software as MX25L12805D)

I attached backup bin from bios chip.

Thanks in advanced, Master and Legends.

flash both
1st boot, press F2, write service tag, disable Absolute, save, restart. 2nd boot press Alt+F to exit manufacturing mode.

[SemmMendrez]

Hi everyone. I have a Dell Optiplex 3000 Micro and the issue is device freeze. I have basic knowledge in computer repairing and this is my first time encountering an issue about bios. So, I purchased a cheap bios programmer online which is CH431A. And I don't know if I used the software to get my backup bin file properly.

Service Tag: 4SC6ZS3
Express Service Code: 10420663971
Bios Chip: MXIC MX77L25650FZ4I42A (detected in software as MX25L12805D)

I attached backup bin from bios chip.

Thanks in advanced, Master and Legends.

[Nikosz]

Unlocked

thanks it is working.

[hoaca388]

Hi,
please help me to unlock bios password
Thanks

S/T: 2Z3F7V3

Unlocked

[Nikosz]

Hi,
please help me to unlock bios password
Thanks

S/T: 2Z3F7V3

[Reda123456]

Guys i got this computer and i have RT809F Programmer, when i try to smart identify smartID it tell me Chip ID: 0x00C27519, the device is not found in the corresponding partnumber, you can click "OK", and then manually add this partnumber with their ID, or copy this message content and chip partnumber, and feedback to the technical support forum, can anybody help me, i am lost in this and i cannot program the bios chip, and the bios chip is MX77L25650F

[adam911]

Unlocked.

thank you

[hoaca388]

hi, please help unlock bios password
S/T: H6MZPT3

Unlocked.

[adam911]

hi, please help unlock bios password
S/T: H6MZPT3

[cris_carriaga]

only flash this 16 mb.
1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode.

thanks it is working

[rex98]

please help unlock password and computrace.
thank you.
ST: 16HTKW3

only flash this 16 mb.
1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode.

[cris_carriaga]

please help unlock password and computrace.
thank you.
ST: 16HTKW3

[hoaca388]

Sorry, i got 3 oranges and 5 whites. Do you know what cause it?

No, i don't knows