Dell optiplex 3000 micro bios

[rex98]

TTECH Device Freeze-4693
Service tag: CRC6ZS3
Board: 057FFP

upload the 16mb dump.

[Anonruwel@gmail.com]

TTECH Device Freeze-4693
Service tag: CRC6ZS3
Board: 057FFP

[mikev1997]

here

This worked. thank you very much you are a life saver

[rex98]

Dell optiplex 3000 micro

service tag 9SHGCX3 EXPRESS SERVICE CODE: 21313410663
please remove password and absolute
here are both the files .. thanks in advance.

here

[mikev1997]

Dell optiplex 3000 micro

service tag 9SHGCX3 EXPRESS SERVICE CODE: 21313410663
please remove password and absolute
here are both the files .. thanks in advance.

[mikev1997]

Dell optiplex 3000 micro

service tag 9SHGCX3 EXPRESS SERVICE CODE: 21313410663
please remove password and absolute
plese check the 16mb file for the absolute and bios password erase. and let me know if 32mb file is also needed.

[aksel3]

Unlocked

thnx WORKED no service tag and assist tag and open manufacture

[hoaca388]

hello need password unlock dell optilex 3000
servicetag 1PDCYX3

Unlocked

[aksel3]

hello need password unlock dell optilex 3000
servicetag 1PDCYX3

[tangnpi]

I need someone to extract the bios files, because the bios was recorded and the board has 3 orange and 6 white LEDs informing this error. I need to update the bios
of the dell optiplex 3000
service tag: 49tl5t3
motherboard: d12 adl6

[SMDFlea]

Dell optiplex 3000 micro
ST: 32J0XT3
please help remove Absolute
thank you

Post the 16MB bios

[mtherana]

Dell optiplex 3000 micro

ST: 32J0XT3

please help remove Absolute

thank you

[hoaca388]

Thank you very much, but I didn't understand a word of it. Am amateur

Yes, me too. CH341A is the cheapest one, it has a default voltage of 5V (black board type) so you have to mod the voltage down to 3.3V or 1.8V. Or you can use the more expensive one.

https://www.badcaps.net/forum/troubl...rces-and-tools

[Fast555]

You must use programmer.

https://www.youtube.com/results?sear...mer+how+to+use

Thank you very much, but I didn't understand a word of it. Am amateur

[hoaca388]

Hello, maybe someone can help me. I bought a used Dell optiplex micro 3000 without a hard drive. Now I bought and installed a new hard drive and then wanted to install Windows. But it doesn't work because the bios is locked with an admin password and USB reading is not allowed at startup. How can I unlock bios without password.
198R7T3-8FC8---many thanks in advance

You must use programmer.

https://www.youtube.com/results?sear...mer+how+to+use

[Fast555]

Hello, maybe someone can help me. I bought a used Dell optiplex micro 3000 without a hard drive. Now I bought and installed a new hard drive and then wanted to install Windows. But it doesn't work because the bios is locked with an admin password and USB reading is not allowed at startup. How can I unlock bios without password.
198R7T3-8FC8---many thanks in advance

[SemmMendrez]

use my post # 113

Good Day! Yes, I used the bin file that you sent on post 113. Unfortunately, it didn't work. So, I tried to get also my 32mb dump. Thanks in advance

[rex98]

Good Day Legends!

I tried to flash this new bin file on both 16mb and 32mb bios. and after that. the board has no power it only shows orange light when I'm pushing the power button but when I release my finger in power button the orange light will disappear. I think the problem is on bin because I only send my 16mb dump on the last thread. So that I tried to get the 32mb dump before I flash the new bin. Please see my attached dump file. Thanks in advance!

Service Tag: 4SC6ZS3
Express Service Code: 10420663971

use my post # 113

[SemmMendrez]

flash both
1st boot, press F2, write service tag, disable Absolute, save, restart. 2nd boot press Alt+F to exit manufacturing mode.

Good Day Legends!

I tried to flash this new bin file on both 16mb and 32mb bios. and after that. the board has no power it only shows orange light when I'm pushing the power button but when I release my finger in power button the orange light will disappear. I think the problem is on bin because I only send my 16mb dump on the last thread. So that I tried to get the 32mb dump before I flash the new bin. Please see my attached dump file. Thanks in advance!

Service Tag: 4SC6ZS3
Express Service Code: 10420663971

[SemmMendrez]

How to add chip support to NeoProgrammer software for the CH341A Programmer https://www.badcaps.net/forum/troubl...41a-programmer

Thank you so much Legends!!