Help HP PRODESK 600 g6 mini bios file

[Macdonald]

hie i have an Hp ProDesk 600 G6 10th gen i need to install windows 7 but the bios does not have legacy support how can i get the bios that support legacy
anyone who can help i need a bios that support legacy support
serial number
ICZ1240997
This is my attached bin file

[highping0r]

HP ProDesk 600 G6 Desktop Mini PC (5S1F0EC)

worked! thanks a lot

[hoaca388]

Both files that are flashed right now. There might be a mismatch. If you need i can also upload the two chips from the other device that workes. maybe just change the SN and so there?

HP ProDesk 600 G6 Desktop Mini PC (5S1F0EC)

[highping0r]

Upload bios file .

Both files that are flashed right now. There might be a mismatch. If you need i can also upload the two chips from the other device that workes. maybe just change the SN and so there?

[hoaca388]

Hey guys,

can someone give me clean Bios and EC file? I unlocked password on EC with RCUnlocker but got the "HP Endpoint Security Controller Problem" Error after. Reset didn´t work and i tried BIOS update with HP software. now im stuck in Update loop and error still exists.

Attached is the EC file i read with password.

SN: 8CC2230687

I also did a second device that worked fine at first attempt.

Thank you

Upload bios file .

[highping0r]

Hey guys,

can someone give me clean Bios and EC file? I unlocked password on EC with RCUnlocker but got the "HP Endpoint Security Controller Problem" Error after. Reset didn´t work and i tried BIOS update with HP software. now im stuck in Update loop and error still exists.

Attached is the EC file i read with password.

SN: 8CC2230687

I also did a second device that worked fine at first attempt.

Thank you

[badmac02]

Hi,
I'm french, sorry for my english
have you managed to initialize the password of your prodesk 600 g6 mini?
If so, how do you do it?
Because I have the same problem.

Thanks in advance

[hoaca388]

Re: hp prodesk 600 g6 desktop mını pc password

clear my bios pass please
sn:8cc20801z4

11111111

[bilal046]

hp prodesk 600 g6 desktop mını pc password

Clear my bios pass please
sn:8cc20801z4

[Greg_E]

Re: Help HP PRODESK 600 g6 mini bios file

Doesn't look like I can edit the above post... I finally spent enough time reading around to realize that the main BIOS chip above was not what I needed. I looked under the processor fan shroud and found a Winbond 16MB BIOS 8 pin chip, that one worked with my EZP2019+ and RCUnlocker.

I did run into a problem where I had to run the unlocker as admin, so I had to use command line to make it work. In an admin level CMD, navigate to the where unlocker is stored and also where you copied your .bin, and type:

rcunlocker.exe yourBIOS.bin

Replace yourBIOS.bin with the file name you used and it should work.

[Greg_E]

Re: Help HP PRODESK 600 g6 mini bios file

Please excuse the newb questions...

What software and hardware are people using on these HP computers?

I have an HP 600 G6 SFF that I need to clear the BIOS password. I've tried an EZP2019+ and that wont read the MX25L25673g BIOS chip. I just ordered a CH341a v1.7 with the voltage switch and hoping I have better luck with it.

Yes I have the correct 16 pin clip to hopefully do in circuit programming (hopefully).

Also any good guide to this whole process? I want to learn to do this, not just ask for someone to unlock my "stuff".

Again sorry for the newb questions and slightly (kind of) off topic. I think this is the same chip as the 600g6 mini in this thread and the closest I've found through many sessions of google searches.

[hoaca388]

Re: Help HP PRODESK 600 g6 mini bios file

Hello,
thanks, but bios has a password again!

Post file from 2nd SPI chip.

[bokak1]

Re: Help HP PRODESK 600 g6 mini bios file

Hello,
thanks, but bios has a password again!

[hoaca388]

Re: Help HP PRODESK 600 g6 mini bios file

Please can You clear my bios!

Unlocked

[bokak1]

Re: Help HP PRODESK 600 g6 mini bios file

Please can You clear my bios!

[hoaca388]

Re: Help HP PRODESK 600 g6 mini bios file

Clear my bios pass please!

Your rar file corrupted, check it.

[bokak1]

Re: Help HP PRODESK 600 g6 mini bios file

Clear my bios pass please!

[bbanana]

Re: hp prodesk 600 g6 mini pc 35W bios locked

no luck for rc unlocker tnc

try this

[peste]

Re: hp prodesk 600 g6 mini pc 35W bios locked

no luck for rc unlocker tnc

https://www.badcaps.net/forum/showth...ght=rcunlocker

[Arrow16]

Re: hp prodesk 600 g6 mini pc 35W bios locked

use RCUnlocher..

no luck for rc unlocker tnc