HP ProDesk 400 G6 Small Form Factor PC bios

[anmunoz531]

Hi, i´ve a broken bios, the machine, PRODESK 400 G6 SFF.
Serial: MXL0343BG3

Here is the attached original backup file.

Thank you in advance.

[ramalhito]

I think you may have either a memory problem a main borad problem or both (les likely). Check pages 79 and 80.

Link http://h10032.www1.hp.com/ctg/Manual/c06713270.pdf

[Kogasar]

Hi guys!
I tried many bios dumps but with all of them it act like there is no bios chip on board.
5 long beep and 7 short beep
Damaged file attached, any idea whats wrong here?

HP Prodesk 400 G6

Serial No: 8CC1121KDP
Product No: 2T7W2ES#ACB

[SMDFlea]

https://www.badcaps.net/forum/troubl...23#post3205923

[Kogasar]

Hi guys!
I tried many bios dumps but with all of them it act like there is no bios chip on board.
5 long beep and 7 short beep
Damaged file attached, any idea whats wrong here?

HP Prodesk 400 G6

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[bluethoraipakkam]

can anyone please help me to decode my bios password from the bin
hp prodesk 400 g6 SFF ( 6EH03AV)



thanks in advance

[dfx]

Password removed successfully!

[dfx]

Edit : Do not lost time on that.
I found out I ran the wrong "HPUnlocker"

Found another one and it created a prodesk400_unlocked.bin. So I will flash that and see if it work.

[dfx]

I need help to get a BIOS password removed. Tried RCUnlocker and HPUnlock without success (Wrong chip). I did eyescan the motherboard and could not find another 16MB chip...

HP ProDesk 400 G6
Product No.4C9A0LA#ABM
Serial: MXL1342QB9

Thanks

[ramalhito]

All working, thank you.

[hoaca388]

Just had time to load the new BIOS and it worked, Thank you. Still I am not able to enter Windows because it says the computer is locked and it's asking for a user name and password. As I got it used I tried to ask the seller but was not able to contact him. Any suggestions please? Thanks again.

Unlocked

[ramalhito]

Just had time to load the new BIOS and it worked, Thank you. Still I am not able to enter Windows because it says the computer is locked and it's asking for a user name and password. As I got it used I tried to ask the seller but was not able to contact him. Any suggestions please? Thanks again.

[ramalhito]

hoaca388, the file attached is the BIOS file or do I need to send something more? Thanks in advance.

[hoaca388]

Hello, to complement my posts Share your ideas and successes!! and 55 here is the serial nº 8CC2200JV0.

Thanks.

HP ProDesk 400 G6 Desktop Mini PC IDS Base Model

[ramalhito]

posts 54 and 55.

[ramalhito]

Hello, to complement my posts Share your ideas and successes!! and 55 here is the serial nº 8CC2200JV0.

Thanks.

[ramalhito]

OK SMDFlea, I'm going to check it, thanks.

[SMDFlea]

Read post #47 .You must post the PC serial number

[ramalhito]

This is the original BIOS file, case it's needed. Thanks.