Hello everyone I'm looking for pictures of the front and back of the card I am missing components. And if there is a similar schematic =D
Thank you very much
Thank you very much
-
Hi, I need the schematic and boardview of a Radeon RX 5700 Pulse, sometimes it turns on, sometimes it doesn't... I checked when it doesn't turn on, the enable signal is missing on pin 15 EN2 3v to power 1.8v... the problem is that when it works I can't test it since the signal is present... I would like to check the signal paths but I would need the diagram and the boardview thanks​... -
Hello there everyone,
I have been trying to repair these 2 different cards that are both 1060 same design by Zotac. I was wondering if anyone on the forum has a schematic or board view for this model. Both cards power on but no post and GPU fan turns off right away. Any help would be great, trying to get one of these to revive for my kids computer to work with Fortnite.
Thanks,
Jeremy01-10-2025, 06:21 PM -
Hello, i need help.
Do someone have Boardview or Schematic PDF for this ?
Device: Desktop Motherboard
Brand: MSI
Model: X670e Gaming Plus Wifi
Do somebody know what this component is? It is in the top right corner from backside. Maybe you can take a picture of your MB for me with component code.
thank you. -
NVIDIA GeForce GTX 1080 1080Ti Schematic & Board View
The GeForce GTX 1080 was a high-end graphics card by NVIDIA, launched on May 27th, 2016. Built on the 16 nm process, and based on the GP104 graphics processor, in its GP104-400-A1 variant, the card supports DirectX 12. This ensures that all modern games will run on GeForce GTX 1080. The GP104 graphics processor is a large chip with a die area of 314 mm² and 7,200 million transistors. It features 2560 shading units, 160 texture mapping units, and 64 ROPs. NVIDIA has paired 8 GB GDDR5X memory with the GeForce GTX 1080, which... -
Hello to all,
I have a missing voltage on this ZOTAC GTX 1050 TI mini card (circled in blue)
I have all my other voltages strangely but the missing one goes up to 0.04 V and measured in Ohm 45 Kohm I find that really high and I expected much less than that.
0 SHORT circuit on the rest of the board
GPU heating and voltage at the coils 0.80 V which is normal for this type of card logically.
Without a schematic it's quite complicated and long to look for.
Do you have an idea?
I checked all my components seems present and checked...