Hello friends, please I would like to know if anyone has a schematic of the motherboard ASUS P8H61-M LX3 PLUS R2.0. Thanks!
-
-
Re: ASUS P8H61-M LX3 PLUS R2.0 schematic
thank you very much indeedLast edited by SMDFlea; 12-09-2022, 12:56 AM.Comment
-
Re: ASUS P8H61-M LX3 PLUS R2.0 schematic
boardviewComment
-
thank you friendComment
-
thank you sir
Comment
-
Hello,
i'm looking for a schematic/boardview for an ASUS E3-PRO V5 (NOT E3 PRO GAMING, has a different layout).
I'm trying to find out where i can find SKTOCC# other than from the socket in order to ground it for a Coffee Lake mod. It must be somewhere near/around the SIO but I haven't found a datasheet for the NCT5539D this board has.
I've also found the schematic for the similarly named E3 PRO GAMING V5 but it has a different SIO so it's not of much help. And I don't trust myself to hold still a multimeter probe on top of a LGA socket pin to find where it comes out the...01-18-2025, 09:17 AM -
Hello
I need schematic for this model ASUS FX516PC R6.0
Thanks.12-27-2024, 03:41 PM -
Asus P4SD-LE-C Motherboard Schematic
ASUS P4SD-LA (HP OEM) is a motherboard based on the Intel 865G...10-21-2024, 05:51 AM -
With ASUS, not everything is quite so simple. I will show you my way. It may be longer or harder but it is the right way to do it in my humble opinion.
For example, you can have 3 similar ASUS motherboards, all being the same model, all of which will have different BIOS versions.
I will give you an example and my version of preparing BIOS from ASUS website and in the process I am always cleaning Intel ME while doing it so you have fully cleaned BIOS, no DMI data, no password, nothing.
This is the picture of 3 similar ASUS motherboards, all of them being X555LD... -
Hi All,
I'm chasing a circuit schematic for an Asus CUV4x Motherboard.
I purchased the board in 'unknown' condition and it doesn't exhibit any signs of life when testing with known good parts.
The board does not power on - No LED illuminated when ATX power connected. When bridging the PS_ON to Ground at the ATX connector the board will power up however seems to fail early chipset initialization at post code C0
Any help greatly appreciated as I'd love to get this cool 'retro' board back to life to live another 25 years!
Thanks
Comment