Hi everyone,

I bought a used Dell OptiPlex 3090 Micro with a BIOS administrator password that I cannot remove. Dell support refuses to help without the original proof of purchase, and the seller is unreachable.

I would like to try flashing the BIOS chip with a CH341A programmer, but I need a clean SPI BIOS dump for this exact model.

Here are my machine details:

Service Tag: 50P1BB3

Express Service Code: 10925963391

Form factor: Micro

I can share my current BIOS dump (read with CH341A) for comparison if needed....

Hi can you help me to repuild bios dump fo dell latitude 9450 2-in-1 ultra 7
original problem was password but the chip 512mb its broken before read it
motherboard/JDB45-LA-M397P
ST/2PFD064
here dump of anoher laptop 9450 2-in 1 but not working whit first laptop...

Hello everyone,

I need the full BIOS dump for a Dell OptiPlex 360.

Details:
- Board number: 0T656F
- BIOS chip: MX25L8005 (1MB)
- Problem: 6 beeps, no video. BIOS corrupted.
- I need the complete dump including bootblock.

If anyone has a working dump from a functional board, please share.

Thank you!...

Subject: Request: HP Omen 17-cb107nr (LA-J672P) - BIOS and EC Firmware Needed
Device Information:

Brand/Model: HP Omen 17-cb107nr

Motherboard Model: GPC27 LA-J672P REV: 1.0

Serial Number: CND0323WY5

The laptop powers on, all voltages appear to be normal, and it seems to boot up, but there is no display (no output) on the screen.

The device was previously serviced at another shop. It looks like the BIOS chip was removed and reprogrammed before. I suspect the current BIOS dump on the chip is not original or is corrupted, causing...

Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...