Please help me clean ME HP Z2 MINI G9

[linan186]

Thank you so much
Why do I get errors when using mfit software? I don't know where the problem is.

[linan186]

bios

[kamran0taya]

HP Z2 MINI G9 BIOS CLEEN PLZ
NO DISPLAY AFTER UPDATE BIOS

[SMDFlea]

HP Z2 MINI G9 BIOS CLEEN PLZ
NO DISPLAY AFTER UPDATE BIOS

Post the PC serial number https://www.badcaps.net/forum/troubl...before-posting

[kamran0taya]

8CN31204QR

[kamran0taya]

HELLO SIR HP Z2 MINI G9
SERIL NO 8CN3070C96
AFTER BIOS UPDATE SYSTEM POWER OFF
BIOS CHIP U19 AND U68
U68 bios corrupte
SYSTEM NO ERROR ONLEY WHITE LIGHT STILL

[hardware1]

HELLO SIR HP Z2 MINI G9
SERIL NO 8CN3070C96
AFTER BIOS UPDATE SYSTEM POWER OFF
BIOS CHIP U19 AND U68
U68 bios corrupte
SYSTEM NO ERROR ONLEY WHITE LIGHT STILL

Here is your new BIOS, try it and let me know.
This file is Main BIOS, flash it to your main chip (U19) chip and solder back your EC chip (U68).

[SergeSN]

Dear Sir,
Could you help me?
I have 5F0H5EA, HP Z2 Mini G9 sn 8CN2300LWM . It doesn't start, display shows message “System board replacement required, please contact HP service”.
I checked the main bios, Intel CSME System Tools v16.1 r0 show error with CSE region. I puted the CSE region to original bios from HP Z2 Mini G9 (U50) (V_03.03.11) (Main).rar file , Fit correctly decomposed the BIOS.
But unfortunately after PC initialized I received the same error.. I tried to fully erased the EC U68 (only FF) but with the same result. I tried to put in the original bios cleared CSE region from site and BIOS region from update from HP image, no success ..
During initialization I see the warning about wrong Security and then “information will restored from embedded controller” .. I don't und erstand about what controller it means .. EC or TMP .. or may I created bad bios