I have a DFI LANParty UT nF4 Ultra-D with A TON of bad capacitors and I need help deciding which caps to replace them with, I've never done this before so I'll use this as a learning experience. I have included a color-coded photo of every single bulging capacitor on this motherboard. All bad caps are KZG, the KY and KMG caps seem to be in perfect condition at least visually. I've read about replacing these caps with polymer ones, but I'm not sure which ones to buy. Thanks.
BLUE = 470uF 16v 8mm x 11.5mm
GREEN = 1000uF 6.3v 8mm x 11.5mm
PINK = 1500uF 16v 10mm x 19.5mm
RED = 1500uF 6.3v 8mm x 18mm
BLUE = 470uF 16v 8mm x 11.5mm
GREEN = 1000uF 6.3v 8mm x 11.5mm
PINK = 1500uF 16v 10mm x 19.5mm
RED = 1500uF 6.3v 8mm x 18mm
Comment