This forum is great! I was about to trash 2 monitors that went bad. sure enough bad caps on the pk101v011i board.. I have not soldered in years but the faq's and links have motivated me.. I have decided to start with replacing the caps ..I checked the links and got lost. Looking for a source for 100 uf at 35 volt or higher caps...any help would be appreciated...tia...dd
-
-
Re: nubie with 2 bad acer al2416wb monitors seeks sources for cap replacement
If you mean one hundred and not one thousand, the Panasonic FC at digikeyOriginally posted by djd View Post
http://search.digikey.com/scripts/Dk...name=P10294-ND
might be suitable. Check height, diameter, ESR, and ripple to make sure it fits your application.--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file --- -
Re: nubie with 2 bad acer al2416wb monitors seeks sources for cap replacement
that is the ticket...I thought that I had checked the site earlier and it had said that the quantity available was zero..thanks again!Comment
Comment