Announcement

Collapse
No announcement yet.

compaq 9500 "no display" problem

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    compaq 9500 "no display" problem

    hello
    i have a compaq 9500 the problem from the first that is no hit and no power in youk then i found mosfet "q408" j584 is short and "r449" is open
    i replaced it and it come in hit and power in youk but no image
    the 6 volt in heater is in here i trayed to change the line olso same problem and i here sound " tek tek tek " but i dont know from here that is sound i think a mosfet is do that?
    any body can help me?

    Thanks,,,
    Tags: None
    #2
    Re: compaq 9500 "no display" problem

    Originally posted by haitham_computer View Post
    any body can help me?
    I appreciate that everyone doesn't speak or write English as their native language.

    If this is the case, you will have to write a better description of what is happening. It is clear you understand how to use a multimeter and know about electronics. We can help, but we just need a more clear description.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

      #3
      Re: compaq 9500 "no display" problem

      Originally posted by haitham_computer View Post
      hello
      i have a compaq 9500 the problem from the first that is no hit and no power in youk then i found mosfet "q408" j584 is short and "r449" is open
      i replaced it and it come in hit and power in youk but no image
      the 6 volt in heater is in here i trayed to change the line olso same problem and i here sound " tek tek tek " but i dont know from here that is sound i think a mosfet is do that?
      any body can help me?

      Thanks,,,
      Please explain 'hit'.

      'tek tek tek' sounds like a SMPS that can't start. The usual cause is a shorted horizontal output transistor.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

      Comment

        #4
        Re: compaq 9500 "no display" problem

        Thanks for replay
        Dears
        "hit" i mean hight voltage from line .
        olso the horizontal transistor is good.
        please tell me what description you want to know ?

        Comment

          #5
          Re: compaq 9500 "no display" problem

          hello
          any body have a datasheet for this monitor??

          Comment

            #6
            Re: compaq 9500 "no display" problem

            Hello
            any body help me?????????????

            Comment

            Previous template Next
            Working...
            X