Sony BDV-E4100 stucked / no image on hdmi / doesn't respond to anything

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sicilianul
    Senior Member
    • Jul 2014
    • 70
    • Romania
    #1

    Sony BDV-E4100 stucked / no image on hdmi / doesn't respond to anything

    Hello,

    I have this blu-ray player which is effective stucked. It responses only from power button. Only a message shows on the screen "BD/DVD" and nothing happens, also no image on hdmi. The dvd tray could be ejected but nothing from here.
    I know it's a software issue, tried allready with powerbutton + Volume -
    Tried with network cable plugged, no update.

    Any ideas ? Or someone who has firmware dump and I could reflashit ?

    thanks!
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • NSkyLab
      Sony XBR-65X900F black and white image on one side (fading saturation)
      by NSkyLab
      I though I've seen all possible kinds of failures but this one is new...
      Colors saturation is gradual.y fading out on the left side of the screen (all colors are fading out). While B&W image is looking good.
      I tried replacing TCon but nothing changed. So this is looking like the panel failure. Is there a chance it can be fixed?
      Any useful measured can be done on the panel's narrow pcbs? Is there may be something similar to taping trick to fix this issue?...
      10-05-2025, 07:37 PM
    • domix
      Sony KD - 65XF9005 - No image, sound OK
      by domix
      Hello,
      at tv KD - 65XF9005 i have a problem.
      Afrer a coupe of minutes (10-30) i got black screen, no image. But i have sound.

      is this a common problem for this tv?

      i attached pictures of inside. Supply board looks okey, no blowed caps....
      07-21-2025, 06:37 AM
    • Document Archive
      HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
      09-12-2024, 02:20 PM
    • Dreamcazman
      Sony KV-XJ29M31 CRT TV - Very dim image on turn on
      by Dreamcazman
      Hi all, I recently picked up a Sony KV-XJ29M31 CRT TV (BG3R chassis, Australian model) cheaply & completed the RGB mux mod on it for some retro gaming. That worked great, however, I have another problem which I hope someone can help me with or at least steer me in the right direction.

      Basically, the issue is when it's cold, it takes a while (like 2 mins) for the picture to come up. I think the image is there, it's just very dark or dim. I can hear the degaussing sound & I can change inputs & hear audio but no image.

      Once it's running properly, it keeps...
      02-28-2022, 07:47 PM
    • x_orange90_x
      Sony KD-60X690E 6 Blinks, no image
      by x_orange90_x
      I just got this today and it has the infamous 6 blink code. I've read it's quite possibly bad backlights, and I intend to check them soon. However, I was just curious if the Sony logo should it's shouldn't be appearing briefly between powering on and the light starts flashing. I've read at least one other person had the logo flash quickly, but mine does not show anything at all, not even a flicker. The green light comes on and after about 5 seconds the red light flashes. So I'd expect in this 5 seconds to see the logo. This leads me to believe it could be a power supply issue.

      I...
      12-10-2024, 09:10 PM
    • Loading...
    • No more items.
    Working...