Hi All,
I'm building an all-in-one solution so all that follows is internal...
I need to drive a 30-inch dual-link TMDS LCD panel with a board that provides the desired 10-bit 2560x1600 resolution only via its internal DisplayPort output (actual port).
Will I need a dedicated DP-TMDS translator board, or could there be some ingenious cable/adapter alternative I'm unaware of?
Thanks!
I'm building an all-in-one solution so all that follows is internal...
I need to drive a 30-inch dual-link TMDS LCD panel with a board that provides the desired 10-bit 2560x1600 resolution only via its internal DisplayPort output (actual port).
Will I need a dedicated DP-TMDS translator board, or could there be some ingenious cable/adapter alternative I'm unaware of?
Thanks!