Hello,
I need help to find the value of 2 missing capacitors ( C102 and C117) on my Easun SMH-II mainboard (solar hybrid inverter). I circled it in red on the close-up picture. The 2 old capacitors are completely missing, so I have no reference. Does anyone have this board and can tell me the value or make an educated guess based on the location ?
My model is : EASUN SMH-II 7 KW
Mother Board : P/N 18947-002401250250
Maybe the EASUN SMH-II 4.2 KW have the same capacitors
Thank you...
Try our new boardview, bios, & schematic search. Over 1.3 million files for download!
Power-One solar Inverter driving me NUTS!!!
Collapse
X
Posted Photos
89 Photos
IMG_2407.jpg
IMG_2884.jpg
IMG_2885.jpg
IMG_2886.jpg
IMG_2887.jpg
IMG_2888.jpg
IMG_2889.jpg
IMG_2890.jpg
IMG_2891.jpg
IMG_2895.jpg
IMG_2896.jpg
IMG_0345.jpg
IMG_2371.jpg
IMG_2907.jpg
IMG_2908.jpg
IMG_2912.jpg
IMG_2913.jpg
IMG_2911.jpg
IMG_2910.jpg
IMG_2915.jpg
Related Topics
Collapse
-
by Cama
-
by Francesc V.A friend of mine bought this inverter in Amazon and never test it........now that the warranty is over, he decided to use it.
The inverter starts working (I am using a 100W load). It works for about 1 minute and then it stops and reboots..........1 minute more and so on. Let's say that is partially working.
I thought it was a feedback topic, so I replaced the opto (PC817) with same result.
Measuring the opto collector (pin 3) I get 5.038V coming from a 78L05
Measuring the opto emitter (pin 4) I get about 5.055 when it's working and decreases about 5.038... -
by Francesc V.My parent's solar inverter died after 5 years of good service.
It's a called hybrid inverter:
- It can go with or without batteries
- It has 2 MPPT (8 330W panels in 2 strings) -> 5280Wp
- A 20kWh lithium battery previously used in a Nissan leaf (14S at 4.1V max) -> 57.4V
Panel is showing error 17 and the battery connection has disappeared. On the other hand, is delivering load, MPPTs are working and it's exporting energy to the GRID. Not that "bad".
Let's open it......
I see that 150A fuse is gone and the... -
by sam_sam_samI just seen this item is this a good idea if why and if not why not
Here is the website link to it
https://www.ebay.com/itm/40599879518....c101465.m3507 -
by eccerr0rMy cheap crappy 1KW grid tie inverter (GTI) seems to keep blowing IGBTs. When I first got it, it had two failed IGBTs. It used four 60N100's (TO264). I bought 5 from a dubious source (fleabay) and replaced just the two that were dead. The GTI worked for almost two years but recently one of the two that I replaced failed. Since I had three spares, I replaced the dead one. Then a few weeks later it failed again. Weird. Well since I bought dubious China-sourced IGBTs from fleabay it could very well just be a mixture of fakes. I replaced it, but then a day later it failed again! I put in the last...
- Loading...
- No more items.