I have an Acer Aspire M1935 desktop with 4 memory slots..which can take memory up to 16GB
the original installed memory is just 2GB 1Rx8 PC3-10600U DDR3 1333Mhz DIMM
what i did is.. i only placed 2 pcs 2gb memory in the first 2 slots.. the system accept it and boot to 4gb ram..
problem is when i placed all 4 memory slots with 2gb memory the system beep code says problem with memory..
i swap all the memory in twos hoping one ram is defective but all where good..
any suggestion..
the original installed memory is just 2GB 1Rx8 PC3-10600U DDR3 1333Mhz DIMM
what i did is.. i only placed 2 pcs 2gb memory in the first 2 slots.. the system accept it and boot to 4gb ram..
problem is when i placed all 4 memory slots with 2gb memory the system beep code says problem with memory..
i swap all the memory in twos hoping one ram is defective but all where good..
any suggestion..
Comment