Need bios Acer Z5W1M La b511p Rev.1.0

[SMDFlea]

Originally Posted by nabilgo

this for programming new i/o

Check post #17 ,the bios.bin is bios ,EC.bin is the i/o

[fyaagoub]

Thanks a lot

[zurvanielle]

thanks ridamouh, it works...

[alihomee]

i tried almost all files available on this forum....only one file works good and trackpad work and shows option for trackpad in bios.....accidently i tried to update and notebook goes dead....now i used all files no one gives the trackpad option in bios .....need help its confirm bios issue as i tested....last good file is attached but this file also does not show trackpad option in bios....mobo code isLA-B511P

[lapfix]

post the originaL dump ...Post your S/N

[alihomee]

Originally Posted by lapfix

post the originaL dump ...Post your S/N

ori file not available so sorry for that
s/n:42116220634

[alihomee]

any help........

[alihomee]

if any one having old file with trackpad setting in bios ...plz shear

[alihomee]

waitting so long any help ....

[alihomee]

any one have a file ....

[alihomee]

ok i found it on a website and flash and trackpad works and shows in bios setup file is attached

[m0seba]

hey guys

I get laptop Acer Aspire E 15 with no power

After I flashed the BIOS, the device turned on but with black screen

first of all if anyone have a original BIOS tested for this Motherboard model ( Z5W1M La b511p )

also when i flash the BIOS i found this msg on the software program
that told me i must use the 1.8v adaptor

actually i never seen this MSG before
for info i have a MiniProTL866CS Programmer

[m0seba]

Originally Posted by m0seba

hey guys

I get laptop Acer Aspire E 15 with no power

After I flashed the BIOS, the device turned on but with black screen

first of all if anyone have a original BIOS tested for this Motherboard model ( Z5W1M La b511p )

also when i flash the BIOS i found this msg on the software program
that told me i must use the 1.8v adaptor

actually i never seen this MSG before
for info i have a MiniProTL866CS Programmer

anyone guide me PLZ ??

[peste]

Originally Posted by m0seba

anyone guide me PLZ ??

yes .. you need a 1.8v adapter ... which you can buy, or you can do it in an hour .... if you have what you need..the schema is given to you by the programmer when he tells you, that you must use the 1.8v adapter.