Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

car, motorcycle programming or decoding

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: car, motorcycle programming or decoding

    Originally posted by Esse View Post
    Please what is live data?and how to you check that
    plug in your scanner and select live data .

    Comment


      #22
      Re: car, motorcycle programming or decoding

      These are the code the scanner gives me:
      P0401
      P0113
      P0102
      P0342
      P0480
      P0088
      P0200
      So give me your advice please
      Last edited by Esse; 11-28-2018, 10:39 AM.

      Comment


        #23
        Re: car, motorcycle programming or decoding

        P0401 EGR
        P0113 IAT circuit high
        P0102 MAF circuit low
        P0342 crank sensor circuit low
        P0480 cooling fan circuit relay
        P0088 fuel rail too high pressure
        P0200 injector circuit malfunction .

        looks to me like someone has been pulling plugs off and on with ignition on . or battery was maybe very low .
        now clear the codes and see what comes back right away .

        p.s nothing to do with throttle control according to those codes .
        Last edited by petehall347; 11-28-2018, 11:21 AM.

        Comment


          #24
          Re: car, motorcycle programming or decoding

          didnt get you well when saying pulling plugs off and on when ignition is on

          Comment


            #25
            Re: car, motorcycle programming or decoding

            apparently the engine ecm suffers corroded contacts on this car .be best to check .

            Comment


              #26
              Re: car, motorcycle programming or decoding

              Please can i use alcool to clean MAF sensor?

              Comment


                #27
                Re: car, motorcycle programming or decoding

                Originally posted by petehall347 View Post
                P0401 EGR
                P0113 IAT circuit high
                P0102 MAF circuit low
                P0342 crank sensor circuit low
                P0480 cooling fan circuit relay
                P0088 fuel rail too high pressure
                P0200 injector circuit malfunction .

                looks to me like someone has been pulling plugs off and on with ignition on . or battery was maybe very low .
                now clear the codes and see what comes back right away .

                p.s nothing to do with throttle control according to those codes .
                what voltage my battery should give me?

                Comment


                  #28
                  Re: car, motorcycle programming or decoding

                  battery should be 12.6v ish with everything off engine not running .. engine running 13.8v to 14.4v ish .
                  yes alcohol but spray it in there .do not touch the sensor part as they break easily .

                  Comment


                    #29
                    Re: car, motorcycle programming or decoding

                    change fuel filter if nothing else fixes it .

                    Comment


                      #30
                      Re: car, motorcycle programming or decoding

                      Originally posted by petehall347 View Post
                      P0401 EGR
                      P0113 IAT circuit high
                      P0102 MAF circuit low
                      P0342 crank sensor circuit low
                      P0480 cooling fan circuit relay
                      P0088 fuel rail too high pressure
                      P0200 injector circuit malfunction .

                      looks to me like someone has been pulling plugs off and on with ignition on . or battery was maybe very low .
                      now clear the codes and see what comes back right away .

                      p.s nothing to do with throttle control according to those codes .
                      I cleared the codes and this morning I scan my car again therefore the scan gives me only one code:P0401
                      Your advice please,should I change the EGR or clean it?

                      Comment


                        #31
                        Re: car, motorcycle programming or decoding

                        try cleaning it first .
                        might need ultrasonic cleaner to clean egr valve .
                        Last edited by petehall347; 11-29-2018, 04:46 AM.

                        Comment


                          #32
                          Re: car, motorcycle programming or decoding

                          Originally posted by petehall347 View Post
                          try cleaning it first .
                          might need ultrasonic cleaner to clean egr valve .
                          I've cleaned it and scan the car ,still the same code

                          Comment


                            #33
                            Re: car, motorcycle programming or decoding

                            egr bad or bad wiring .

                            Comment


                              #34
                              Re: car, motorcycle programming or decoding

                              This is my EGR
                              My mechano say my EGR is not faulty and we’ve cleaned it and but it back
                              Please I want to understand something,why my scanner is saying with P0401 code that there is something wrong with my EGR,since my there is no wire connection with the EGR
                              Please need your explication
                              Attached Files
                              Last edited by Esse; 11-30-2018, 09:25 AM.

                              Comment


                                #35
                                Re: car, motorcycle programming or decoding

                                https://www.700r4transmissionhq.com/p0401-ford-fiesta/

                                Comment


                                  #36
                                  Re: car, motorcycle programming or decoding

                                  Any help please

                                  Comment


                                    #37
                                    Re: car, motorcycle programming or decoding

                                    Originally posted by Esse View Post
                                    Any help please
                                    yes i posted that link for you to look at

                                    Comment


                                      #38
                                      Re: car, motorcycle programming or decoding

                                      I'm not seeing that DPFE sensor on my car,can u show me some pictures of it on Ford Fiesta vehicle?

                                      Comment


                                        #39
                                        Re: car, motorcycle programming or decoding

                                        i do not have any pictures .
                                        i would think there is a solenoid valve to check at the other end of the vacuum tube

                                        Comment


                                          #40
                                          Re: car, motorcycle programming or decoding

                                          Please can u get me a diagram or a schematic document about the inside of my car?so that I can trace the DPFE

                                          Comment

                                          Working...
                                          X