Hi,
I have an Avell Titanium B153 Max on my bench, with a DA0TWSMB6E0 REV E motherboard. Currently, the machine is not booting.
First question, does this machine need a working battery to boot? Or just plug in the charger?
I was measuring the main voltages and where I found the most failures was in the graphics processing part. However, I don't know if these tensions have to be present right from the beginning of the boot.
When trying to boot, the Logic Board has a stabilized consumption of 0.06A. I cannot find any short circuit.
Anyone who already has some experience with this Logic Board model?
Best regards.
I have an Avell Titanium B153 Max on my bench, with a DA0TWSMB6E0 REV E motherboard. Currently, the machine is not booting.
First question, does this machine need a working battery to boot? Or just plug in the charger?
I was measuring the main voltages and where I found the most failures was in the graphics processing part. However, I don't know if these tensions have to be present right from the beginning of the boot.
When trying to boot, the Logic Board has a stabilized consumption of 0.06A. I cannot find any short circuit.
Anyone who already has some experience with this Logic Board model?
Best regards.