Hello everyone...
Just got confused with this mainboard, it's working flawlessly using external display via VGA port. After entering windows 7 welcome screen, internal display turned on by it self and it's cloned to external VGA display. But without external display attached to VGA port it's nothing on internal display and it's not booting to hard drive, all power rails is present when using only internal display except on lvds connector, only these pin has a voltage on it:
pin 1-3: 19v
pin 10, 12, 13, 20, 37, 40: 3.3v.
Updating bios same result, try to jumper U4601 pin 3 to pin 5 to get voltage on lvds connector pin 38 & 39 only resulting black LCD no image and backlight. Tried reflow the CPU same result.
Any help would be appreciate it, thank's in advance
Link to boardview + Repair guide https://www.badcaps.net/forum/showthread.php?t=124492
.
Just got confused with this mainboard, it's working flawlessly using external display via VGA port. After entering windows 7 welcome screen, internal display turned on by it self and it's cloned to external VGA display. But without external display attached to VGA port it's nothing on internal display and it's not booting to hard drive, all power rails is present when using only internal display except on lvds connector, only these pin has a voltage on it:
pin 1-3: 19v
pin 10, 12, 13, 20, 37, 40: 3.3v.
Updating bios same result, try to jumper U4601 pin 3 to pin 5 to get voltage on lvds connector pin 38 & 39 only resulting black LCD no image and backlight. Tried reflow the CPU same result.
Any help would be appreciate it, thank's in advance
Link to boardview + Repair guide https://www.badcaps.net/forum/showthread.php?t=124492
.
Comment