Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Magnavox/Phillips 37" LCD Brightness going nuts.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Magnavox/Phillips 37" LCD Brightness going nuts.

    A friend of mine had this TV for about 4-5 years and started getting this bright/dark thing going on. Made it impossible to watch. Opened it up and found 2 bad caps on power board. Replaced them but problem actually got worse, as in not starting at all.

    The caps I replaced were still working but it was the 2200uf cap in the back of the picture that was the problem. Replaced and is working just dandy. I hope this helps some, keep up the good fight and thanks for such a valuable resource.

    #2
    Re: Magnavox/Phillips 37" LCD Brightness going nuts.

    Great to hear you fixed it. "Elite" capacitors fail again, and it looks like only two of the three that failed bulged.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    Working...
    X