Vestel 42 inch VES420UNDL no picture, backlight ok, sound ok

[freccia]

Re: Vestel 42 inch VES420UNDL no picture, backlight ok, sound ok

Check the solder joints on the sockets.

yes was thinking about that as well. will have a look tomorrow, maybe some flux and a heat gun will do the trick. what temperature should i make the heat gun for the connector not to melt the plastic, around 200 celcius maybe?

[nomoresonys]

Re: Vestel 42 inch VES420UNDL no picture, backlight ok, sound ok

Prolly around 220 or so, you should be able to tell by looking maybe with a magnifying glass and give m the wiggle test to see if any are loose.

[freccia]

Re: Vestel 42 inch VES420UNDL no picture, backlight ok, sound ok

Prolly around 220 or so, you should be able to tell by looking maybe with a magnifying glass and give m the wiggle test to see if any are loose.

Checked them, nothing seems loose though. Tried with heat gun but nothing.
Going to order a tcon but need to wait 2 months for it to arrive due to shipping delays.