ms-7957 ver 1.0 HP ProDesk 490 G3

[GraveRaven]

Hello everyone
i have a motherboard ms-7957 ver 1.0 HP ProDesk 490 G3 and it has a corrupted Bios, and i serch for 3 days for the bios to flash with usb programmer and coudn't find a working bios flash file...pls help me i'm begging you.

[SMDFlea]

Originally Posted by GraveRaven

Hello everyone
i have a motherboard ms-7957 ver 1.0 HP ProDesk 490 G3 and it has a corrupted Bios, and i serch for 3 days for the bios to flash with usb programmer and coudn't find a working bios flash file...pls help me i'm begging you.

Post your bios backup here .

[abdnassar]

HP ProDesk 400 G3 MT
MS-7957 VER 1.0 16MB

[sdrmnb30]

Originally Posted by abdnassar

HP ProDesk 400 G3 MT
MS-7957 VER 1.0 16MB

Salam O Alaikum.. thank you brother... i try this bios its working perfect...

[JersonP]

Originally Posted by abdnassar

HP ProDesk 400 G3 MT
MS-7957 VER 1.0 16MB

working

[selmanla1]

Originally Posted by abdnassar

HP ProDesk 400 G3 MT
MS-7957 VER 1.0 16MB

ok very thanks.it is worked

[ipc]

Hello everyone,
May I ask you the exact way you do the flash ?
I've read in another part of the forum that we can flash the bad bios with a usb key
I've taken an fat32 8 gb usb key,
i've shorten the bbr connector on the motherboard, put the usb key on a USB2.0 port,
start the computer, and let it go for at least 5 mn, but it doesn't seems to do anything.

Can you help me guys ?

[peste]

Originally Posted by ipc

Hello everyone,
May I ask you the exact way you do the flash ?
I've read in another part of the forum that we can flash the bad bios with a usb key
I've taken an fat32 8 gb usb key,
i've shorten the bbr connector on the motherboard, put the usb key on a USB2.0 port,
start the computer, and let it go for at least 5 mn, but it doesn't seems to do anything.

Can you help me guys ?

https://www.youtube.com/watch?v=DWWigscuQDY

[ipc]

thanks for your answer, i'm going to check this !