Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

    Hello.
    I have Lenovo B580 LA58 11273-1 with no reaction on PWRBTN, but charging. i found no EN signal on 5/3.3V IC. flashed bios and now have 3.3/5V,REG, EN but still no reaction to PWRBTN.

    #2
    Re: Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

    Make Sure it is known working BIOS or try with another bin. And of course, Check whether the Power Switch is working Like expected.
    FairRepair on YouTube

    Comment


      #3
      Re: Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

      i have only bios from alisaller so im waiting to get anotheone. dont have shematic so i dont know what pin on KBC is PWRBTN, but on powerswitch board everything works

      Comment


        #4
        Re: Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

        Originally posted by ktmmotocross View Post
        i have only bios from alisaller so im waiting to get anotheone. dont have shematic so i dont know what pin on KBC is PWRBTN, but on powerswitch board everything works
        This schematic is close enough - https://www.badcaps.net/forum/showthread.php?t=63855
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #5
          Re: Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

          after next flash of bios i have working board. But still not reaction to PWRBTN when i attach LCD cable.
          replaced/removed display and unconnect camera but still the same. can this make bad LID sensor?
          Last edited by ktmmotocross; 07-15-2021, 12:56 AM.

          Comment


            #6
            Re: Lenovo B580 LA58 11273-1 - no reaction on PWRBTN

            looks like it can. desoldered lid sensor from little board and everything works

            but i lost that damn little sensor. it is universal so i can use one from another board?
            Last edited by ktmmotocross; 07-15-2021, 01:01 AM.

            Comment

            Working...
            X