I was hoping to use this for a new build. I was using it to test motherboards on the bench. It was working fine and the one day it refused to power on.
On removing the cover there are no burned or bloated parts. It's really packed tight with heavy duty components.
I tested the fuse with the Ohms setting of my meter and and it's not blown.
Where do I go from here? I will try to get a schematic, but these guys are out of business
Model is BFGR1000WEXPSU. It has 4 12-volt rails with 36A on each rail. Seems worthwhile to repair this if possible.l
On removing the cover there are no burned or bloated parts. It's really packed tight with heavy duty components.
I tested the fuse with the Ohms setting of my meter and and it's not blown.
Where do I go from here? I will try to get a schematic, but these guys are out of business
Model is BFGR1000WEXPSU. It has 4 12-volt rails with 36A on each rail. Seems worthwhile to repair this if possible.l