Bought a broken Vizio P42HDTV10A that was in mid-repair and decided to make a little project out of it. I've come across post on here about common problems with the tv, and I'm hoping I can get to the point where I can diagnose it, but first thing is first: When I took off the back panel, the first thing I noticed was that a couple of the caps were already missing.
It is from the power board, # 3501Q00201A, and I've learned is used in several other models. It is the 2 large caps on on the right side of the power board, c169 and c170. I've come across pictures of the board that appear to say 330uF, but I can't see any other info on it. Any chance anyone knows what they are and where I can get them?
It is from the power board, # 3501Q00201A, and I've learned is used in several other models. It is the 2 large caps on on the right side of the power board, c169 and c170. I've come across pictures of the board that appear to say 330uF, but I can't see any other info on it. Any chance anyone knows what they are and where I can get them?
Comment