Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Hp probook 450 g3 not turn on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Hp probook 450 g3 not turn on

    Originally posted by techtiger View Post
    remove C28 and check if the 3.3V is back CN5 pin 3
    no now i have 2.5 v

    Comment


      #22
      Re: Hp probook 450 g3 not turn on

      Originally posted by SMDFlea View Post
      The Q8 pins are wrong in the schematic - https://www.badcaps.net/forum/showth...ht=DAX63CMB6C0



      when i pres power butonn pin 1 and pin 3 going 0 v its ok ? power buton in cn5 is pin 3 and he conect with pin 1 the mosfet Q8
      Attached Files

      Comment


        #23
        Re: Hp probook 450 g3 not turn on

        Originally posted by arber1232 View Post
        in pin 10 i have 5.4v
        Yes as you mentioned at post #12 ., sorry .You still have 0v though at pin 2 PGOOD ,test resistance to ground and PR70 should be 3.3K ,and test voltage on PR348

        .
        Last edited by SMDFlea; 03-30-2021, 08:44 AM.
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #24
          Re: Hp probook 450 g3 not turn on

          Originally posted by SMDFlea View Post
          Yes as you mentioned at post #12 ., sorry .You still have 0v though at pin 2 PGOOD ,test resistance to ground and PR70 should be 3.3K ,and test voltage on PR348

          .
          PR70 is 3.3k .. and voltage 0 v .....
          PR348 is 0.99k and voltage 0.5v
          Last edited by arber1232; 03-31-2021, 01:42 AM.

          Comment


            #25
            Re: Hp probook 450 g3 not turn on

            Originally posted by SMDFlea View Post
            Yes as you mentioned at post #12 ., sorry .You still have 0v though at pin 2 PGOOD ,test resistance to ground and PR70 should be 3.3K ,and test voltage on PR348

            .
            CAn i try to jumb pin 2 PGOOD with pin 4 in Pu21 to have 5v ?

            Comment


              #26
              Re: Hp probook 450 g3 not turn on

              Originally posted by arber1232 View Post
              CAn i try to jumb pin 2 PGOOD with pin 4 in Pu21 to have 5v ?
              No, you cant. Check pin5 of PU21 also. The voltage at the power switch may be ok. Have you flashed bios?? If not, do that first.

              Comment


                #27
                Re: Hp probook 450 g3 not turn on

                Originally posted by mcplslg123 View Post
                No, you cant. Check pin5 of PU21 also. The voltage at the power switch may be ok. Have you flashed bios?? If not, do that first.
                pin 5 .. 3.3v ,,, no im not try bios
                Last edited by SMDFlea; 03-31-2021, 07:28 AM.

                Comment


                  #28
                  Re: Hp probook 450 g3 not turn on

                  Originally posted by arber1232 View Post

                  pin 5 .. 3.3v ,,, no im not try bios
                  Attached Files

                  Comment


                    #29
                    Re: Hp probook 450 g3 not turn on

                    Originally posted by arber1232 View Post
                    NO, only use SY8208C
                    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                    Comment


                      #30
                      Re: Hp probook 450 g3 not turn on

                      Originally posted by SMDFlea View Post
                      NO, only use SY8208C
                      hiii everyone im back i change this ic SY8208C but now something else happens to me the laptop turns on with a battery that is charged but does not get charged and does not turn on if the battery is not inserted .. the moment the laptop turns on I can remove the battery and it works fine when both are and the charger and laptop battery does not charge

                      Comment


                        #31
                        Re: Hp probook 450 g3 not turn on

                        @arber1232, Can we really help with much information you gave?? Why not check the basic stuff like DC-IN mosfets D-S-G pin Voltage, check them for short,check charging ic pin voltage,AD_ID status?? With only adapter connected, do you get dc jack light??

                        Comment


                          #32
                          Re: Hp probook 450 g3 not turn on

                          Originally posted by mcplslg123 View Post
                          @arber1232, Can we really help with much information you gave?? Why not check the basic stuff like DC-IN mosfets D-S-G pin Voltage, check them for short,check charging ic pin voltage,AD_ID status?? With only adapter connected, do you get dc jack light??
                          I checked everything you are saying but the voltages there are OK .. no I do not have any light on .... in DC IN pins the voltages are
                          pin1 and 2 19.6 v
                          pin 3 and 4 GND
                          pin 5 are 5v
                          pin 6 - 0v
                          pin 7 -3.5 v
                          pin 8 - 3.3 v
                          and i not have light in dc charger no white or amber

                          Comment


                            #33
                            Re: Hp probook 450 g3 not turn on

                            @arber , as mcplslg mention before , start by the basic stuff .
                            PQ26/27 = D,S and Gate voltages

                            U13 =
                            Pin 42 = ADP_A_ID
                            Pin 44 = OCP_A_IN

                            Comment


                              #34
                              Re: Hp probook 450 g3 not turn on

                              Originally posted by lapfix View Post
                              @arber , as mcplslg mention before , start by the basic stuff .
                              PQ26/27 = D,S and Gate voltages

                              U13 =
                              Pin 42 = ADP_A_ID
                              Pin 44 = OCP_A_IN
                              i have 19v in this mosfet are ok but with charger laptop not turn on .. with batery turn on .. and no light in dc jack

                              pin 42 . and pin 44 not voltage but this line is ok not shorts
                              Last edited by arber1232; 04-27-2021, 02:46 AM.

                              Comment


                                #35
                                Re: Hp probook 450 g3 not turn on

                                @arber , please give us the voltage as i ask for and not only OK

                                Comment


                                  #36
                                  Re: Hp probook 450 g3 not turn on

                                  Originally posted by lapfix View Post
                                  @arber , please give us the voltage as i ask for and not only OK
                                  Pin 42 = ADP_A_ID-- 0v
                                  Pin 44 = OCP_A_IN-- 0v

                                  sorry do you need other voltage ?

                                  Comment


                                    #37
                                    Re: Hp probook 450 g3 not turn on

                                    PQ26/27

                                    PR173 from the 2 sides / PQ5

                                    Use the BRD given by SMDflea to locate it

                                    Comment


                                      #38
                                      Re: Hp probook 450 g3 not turn on

                                      PQ26-19.5 v both side

                                      PQ27-19.5 v both side

                                      PR173-0V both side

                                      PQ5
                                      Pin 1-0v
                                      pin2-7v
                                      pin3-0v

                                      Comment


                                        #39
                                        Re: Hp probook 450 g3 not turn on

                                        Are DC IN pins pin 6 short to GND !
                                        PQ23 voltages
                                        R174 / 172 value !

                                        Sorry PQ 26 Gate !
                                        Last edited by lapfix; 04-27-2021, 04:01 AM.

                                        Comment


                                          #40
                                          Re: Hp probook 450 g3 not turn on

                                          No is not shorts..
                                          R174-13k
                                          R172-100k



                                          PQ23
                                          pin 1-0v
                                          pin2-0v
                                          pin3-0v

                                          Pq 26 i remove and i jump D with S
                                          Last edited by arber1232; 04-27-2021, 04:11 AM.

                                          Comment

                                          Working...
                                          X