Re: Mackie CR4 monitors
Here's a silly thought - any chance there's room on the backplate to mount the transformer on the outside, using the same mounting holes? Going by the photo, there should be.
That way, you'd just have to lengthen the five wires (mains in, sec-0-sec) - might need to drill one extra hole (or two) though - and ideally add a rubber / plastic bushing, to protect the wire insulation.
Here's a silly thought - any chance there's room on the backplate to mount the transformer on the outside, using the same mounting holes? Going by the photo, there should be.
That way, you'd just have to lengthen the five wires (mains in, sec-0-sec) - might need to drill one extra hole (or two) though - and ideally add a rubber / plastic bushing, to protect the wire insulation.
Comment