I found bios from the YEPO 737 laptop, but I don't know what the motherboard. The laptop doesn't work with any ...starts and after a few seconds, the cooler spins to the maximum, has no video .. I tried to make a good bios but I failed ...
fixed bios1 works ... This message appears at the beginning, but, i think i can handle it from here.
Thank you smdflea..
Hello! I have the same sa116h_v01 board. After changes in the BIOS, when you boot the computer requires you to enter a password. You wrote above that you changed BIOS. But there are two flash MSs.gd25q80csig and gd25lb64cvig. Which one to flash? And How? Or without soldering MS, via usb? Sorry for the stupidity, I work as an industrial electronics engineer and system. board for me as part of a CNC machine.
You can try it,but make a backup of your bios first. The pass in your bios can be removed if you backup and post it. You`ll need an SPI bios programmer with 1.8V adapter,and a clip if you can`t desolder the chip. https://www.aliexpress.com/item/4001045543107.html
Unfortunately, dumps from the Fix1 and Fix2 archives did not fit. When loading, the screen is black, there is no video. When I flash the backup, it asks for the password again. Archive dumps had to be recorded with a new name? Or do you need to deal with another gd25q80csig chip?
Comment