Badcaps Forums - View Single Post

**freakaftr8** · 01-21-2018, 03:59 AM

Ok confirmed voltages are not turning on. Like I said before bridging ICA1 or ICB1 will generate a crosshatch flickering pattern because of crosstalk feedback and not a filtered DC bus to the AVDD, only supplying 10v to AVDD this way, where it need a a minimum of 16v I can see an image!

So DC regulators are for certain not being turned on. Why?

5 tcons later and same thing!

Is this the mainboard that has tok do the switching? Of course with this hack I still have no VCOM, VREF, or VGH, so it's not right however looks like the panel is trying to work.

01-21-2018, 03:59 AM	#49
freakaftr8 Badcaps Veteran Join Date: Oct 2012 City & State: Folsom, CA My Country: USA Line Voltage: 120vac 60hz I'm a: Hobbyist Tech Posts: 3,720	Re: Sony XBR75X850C no picture backlights on Ok confirmed voltages are not turning on. Like I said before bridging ICA1 or ICB1 will generate a crosshatch flickering pattern because of crosstalk feedback and not a filtered DC bus to the AVDD, only supplying 10v to AVDD this way, where it need a a minimum of 16v I can see an image! So DC regulators are for certain not being turned on. Why? 5 tcons later and same thing! Is this the mainboard that has tok do the switching? Of course with this hack I still have no VCOM, VREF, or VGH, so it's not right however looks like the panel is trying to work. __________________ Did I leave the soldering iron on?