‎Dell Inspiron 4010 (14R N4010) DA0UM8MB6E0 Laptop Boardview

[Document Archive]

Dell Inspiron 4010 (14R N4010) DA0UM8MB6E0 Laptop Boardview

[tuankietkiet]

Can you share the board # from the white silkscreen? Unable to locate the proper boardview / schematic for this model in my database. For sure the 8 pin SOIC looks to be defective and it should be replaced.

Also, be sure to use the official Dell power adapter that is suitable to power this board. The adapter ID communication using the 1-wire interface must take place for the logic board to power up. This signal is inside the power adapter connector and often is called PS_ID in the schematics. This signal has caused faults in the past and should be investigated. Without this proper communication, the logic board cannot know the power rating of the attached power adapter.

Glad to have a Badcaps legend helping. The board's model is DA0UM8MB6E0 REV: E. I have the schematic and boardview files. The Dell charger is original and have been known to be good.