TDA2822M Amplifier Datasheet

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Document Archive
    Administrator
    • Feb 2024
    • 115471
    • -
    #1

    TDA2822M Amplifier Datasheet

    The TDA2822M is a monolithic integrated circuit in 8 lead Mini dip package. It is intended for use as dual audio power amplifier in portable cassette players and radios.

    TDA2822M DUAL LOW-VOLTAGE POWER AMPLIFIER FEATURES:

    ● SUPPLY VOLTAGE DOWN TO 1.8V
    ● LOW CROSSOVER DISTORSION
    ● LOW QUIESCENT CURRENT
    ● BRIDGE OR STEREO CONFIGURATION

    Data 2003
    Attached Files
    User submitted datasheet, schematic, boardview, service manual, firmware, bios, & software.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • MrCommunistGen
      Polk Audio RTi100 Plate Amplifier won't power on and intermittently honks and buzzes
      by MrCommunistGen
      My childhood best friend was killed about 9 years ago. His parents are finally letting go of his things, and they offered me his Polk RTi100 tower speakers. The Polk RTi100 towers are one of a handful of designs from the early 2000s that is a full range 3-way tower with a built-in self-powered subwoofer. This is accomplished with a plate amp integrated into the speaker input panel.

      I think they used them for a while, but they've been sitting for at least a few years now. After about 40 hours of driving to their house and back (both they and I have moved in the last 9 years) I got...
      07-12-2021, 05:11 PM
    • jinu_j
      How to test Subwoofer Amplifier with only a multimeter
      by jinu_j
      Hi Folks

      Need some advice on how to test a subwoofer amplifier if i have access to only a multimeter.

      Problem
      I have a Boston Acoustics active Subwoofer (soundware S). Its rated output is 200W. But the output i am getting is very low i can barely hear/feel it even if put the gain at max. I replaced all the capacitors in the Subwoofer amplifier but still no change.

      Is there anyway to test this without getting an oscilloscope/Function generator to see if the fault is with amplifier, driver or the source??

      Any advice would be appreciated...
      08-29-2024, 02:05 AM
    • RandoomStyle
      HP Envy X360 Image distorsion
      by RandoomStyle
      Hello, first this is my first post so if i did something wrong tell me!

      I recently bought a faulty Hp Envy m6-w101dx, no image, when i turn on its loaded with Windows 11 and it was working a few minutes then it got vertical lines, distorsion and then the screen goes black, and never come back unless i power it off and then on. I try external HDMI but no image, i opened up and i found HDMI IC burned, i measure impedance, voltages and nothing out of normal.

      I loaded windows 10 and goes worst i just can enter on login screen and then the distorsion comes, on safe mode i...
      1 Photo
      07-22-2024, 03:03 PM
    • UserXP
      Mackie CR4 amplifier no sound
      by UserXP
      Hi, people.

      I've got an amplifier assembly from Mackie CR4 parts. It's just an amplifier, there was no speaker housing, so I used my set of CR4s to test it.

      Anyway, upon connecting everything and hooking the "new" amplifier to an audio source, the sound played clearly and strongly for the first ten seconds. I was happy it was working. Then the sound started to fade out during the playback until it was no more. After it had "dropped to zero", there were two very short intervals of sound playing at the normal volume, as if the amplifier was trying to...
      10-17-2020, 05:06 PM
    • mikey5791
      Help on car amplifier only one channel works
      by mikey5791
      Hi all forum members,
      Fyi, i have been working on this old model PCT-4082 (4 channel car amplifier). The owner said only one channel is working.
      My initial finding is this amp originally use Toshiba 2SA1943 and 2SC5200 transistor for its output but after opening the top casing i found it used Toshiba A1941 (pnp)and C5198(npn). I desoldered all the 4 pairs transistors and found 1 piece A1941 open(tested "OL" on all legs) and replaced the 1st pair with 2SA1943 and 2SC5200, thats why you can see in the picture it is the bigger size transistor. The other A1941 and C5198 all...
      08-06-2025, 10:36 PM
    • Loading...
    • No more items.
    Working...