Hello,
Can you tell me somebody the operating value of DZ320 diode from supply board(title) ?
A picture would help.
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
What do the markings on the ZD say? I think I see "45" in red? If you desolder it, you should be able to see the whole thing?
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
This the 4,3 zener i soldered into board. The original dioda was burned.....
But the supply don't start...
Do you see any secondary voltages on connector at the bottom of the power board with your multimeter?
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
Does somebody know what I can do with 4 potentiometers which I can see on the board ? I just replace one of the HV transformer because that one before had broken secondary winding.
I don't know how it works before that, but now i can hear how it works when i put my ear over the monitor. I'm wondering is it too loud ? That's what I'm asking about potentiometers, what I cand do with them. I was testing monitor for 3 hours and it's everything ok but that noise hmm.
Comment