Hi everyone i have laptop Lenovo Legion 5 15IMH6 need bios . .
model board is HY56F / HY56H NM-D821
SN:PF33HWLL
THIS IS BACKUP BIOS...

Dear Badcaps, i got a HP PRO X2 612 G1 with a BIOS password. Im pretty new to the whole BIOS flashing game but i was able to flash a HP Probook 2 weeks ago with help of this forum.
Now with the HP PRO X2 612 G1 i have the problem that im not 100% sure if i got the right IC and if i am doing everything right in terms of reading it.
I use the CH341A to read the BIOS. The Chip i try to flash got "771AW G GBA 609B" writen on it. I tried with the 25xxx and the 24xxx slot but i dont get a read from AsProgrammer :/

I solderd it out and put it on the 25xxx frame that...

I have a salvage ASUS FX506HEB-HN187T i have now got working but there is a BIOS password on it.

S/N:MANRCX05R68143A

I have no experience in bios reading/writing on windows machines.

I have a ch341a but ive never used it so i wouldn't know where to start.

can anyone help?

thanks...

I have an air con appliance that doesn't always start when power is applied. I have removed the small control board which is separate from and supplied by a 24v power supply (that works fine) and inspected it for any obvious failed components but can see none. I have discovered that the board will start if I wave a hair dryer over it for a few seconds. The board appears to have no temperature sensors or sensitive components on it. Can anyone suggest what the most likely candidate for a failure mode of this form.
Many thanks.
John...

Hello ,
Need Schema or boardview Lenovo L15 gen 3
thanks
Ref LG4 LT5 ADL RT UMA MB
[ATTACH=JSON]{"data-align":"none","data-attachmentid":"3160768","data-size":"medium"}[/ATTACH]
Button power not workHello ,
Need Schema or boardview Lenovo L15 gen 3
thanks
Ref LG4 LT5 ADL RT UMA MB
[ATTACH=JSON]{"data-align":"none","data-attachmentid":"3160768","data-size":"medium"}[/ATTACH]
Button power not work...

Hello folks, this is a last ditch effort. I thought I would seek your expertise before giving up.. I have been working on this thing for over 2 months and have gotten nowhere. Here is the issue:
Inverter powers on and immediately red GFI light comes on and inverter will not complete the initialization process.
There is no error code on the screen. I have removed most of the Y capacitors and tested to no avail.
All relays are good.
I replaced the current transducer- same problem. Checked most of the transistors and diodes and all appear good. I wish I could get my hands...

I have Dell latitude 7320 bios locked with 8fc8 password. Please help me to unlock. Thanks very much

OMEN by HP Laptop 16-c0002dx G3KQ DAG3KQMBAD0 REV.D

need...

Good afternoon,

Hello friends, I'm looking for the circuit diagram
Model: A6505_PK85a is 2917 H103C​
Thank you

Hello

Doesn't just start the screen goes on and off
Home screen Empty battery with plug shows nothing more happens
over 3.0 volts dancing
Thank you

I have an air con appliance that doesn't always start when power is applied. I have removed the small control board which is separate from and supplied by a 24v power supply (that works fine) and inspected it for any obvious failed components but can see none. I have discovered that the board will start if I wave a hair dryer over it for a few seconds. The board appears to have no temperature sensors or sensitive components on it. Can anyone suggest what the most likely candidate for a failure mode of this form.
Many thanks.
John...

OMEN by HP Laptop 16-c0002dx G3KQ DAG3KQMBAD0 REV.D

need...

Hi people.

I have been trying to get my head round these issues with the eMMC putting the TV in to a boot loop condition, or completely dead, when a dump of the Boot 1, Boot 2 and USERDATA partitions have been made, the MLC lifetime counter has been reset, using the original eMMC with the RPMB partition intact and the eMMC is flashed with the original dump, Netflix and a few other Apps don't work. i assume all the DHCP keys and factory programmed RPMB access Key will be contained within the original dump, and as we are re-flashing the original eMMC i would expect every thing to work....

I have Dell latitude 7320 bios locked with 8fc8 password. Please help me to unlock. Thanks very much

Hi

[U]Pilot PD43S9HE Led TV . Panel model[/U]: See in photos

Photos tell it all really. ( added Logo image photo )
The bulge in the area before the panel Matrix .
To me it looks like a local short that heated inside.

Should I waste my time in flipping the panel , as if this issue can be repaired ?
The distribution board at this end looks ok , though I did not measure anything

What are your thoughts ?

CheersHi

[U]Pilot PD43S9HE Led TV . Panel model[/U]: See in photos

Photos tell it

Hello ,
Need Schema or boardview Lenovo L15 gen 3
thanks
Ref LG4 LT5 ADL RT UMA MB
[ATTACH=JSON]{"data-align":"none","data-attachmentid":"3160768","data-size":"medium"}[/ATTACH]
Button power not workHello ,
Need Schema or boardview Lenovo L15 gen 3
thanks
Ref LG4 LT5 ADL RT UMA MB
[ATTACH=JSON]{"data-align":"none","data-attachmentid":"3160768","data-size":"medium"}[/ATTACH]
Button power not work...

Good afternoon,

Hello friends, I'm looking for the circuit diagram
Model: A6505_PK85a is 2917 H103C​
Thank you

When the power is turned on, a snapshot appears on the screen and it turns off. 2 red LEDs are flashing.

I disconnected the power module cable going to the main board. I threw a power on jumper with 3.3 v from outside. The relay is working and there is 12v and other voltages in the power socket.

Where else should I look? All fuses appear to be intact.​

hello everyone i need original bios and EC of this laptop

[COLOR=#2980b9][B]L14 Gen 2 Type 20X2-s2c100[/B][/COLOR]

SN [COLOR=#e74c3c][B]PF3G8DFB[/B][/COLOR]hello everyone i need original bios and EC of this laptop

[COLOR=#2980b9][B]L14 Gen 2 Type 20X2-s2c100[/B][/COLOR]

SN [COLOR=#e74c3c][B]PF3G8DFB[/B][/COLOR]hello everyone i need original bios and EC of this laptop

[COLOR=#2980b9][B]L14 Gen 2 Type 20X2-s2c100[/B][/COLOR]

SN [COLOR=#e74c3c][B]PF3G8DFB[/B][/COLOR]hello everyone i need original bios and EC of this laptop

Hello. I have a samsung ue55ju6875u that hade led backlight problem and the cause was a glitchy conector to the led feedstrip.

The problem now is that the wire pin 1 on the led connector broke lose an shorted against the chassie and now the tv is dead, no red light when plugging in the power cord before the short the relay clicked and it was a red light for a few seconds then it blinked 5 times.

The power board is an bn44 00859a can anyone point me in the right direction what to check to solve the problem or maby someone have an electrical diagram for a bn44 00859a....