Re: LG50PC3D - help with image diagnosis.
Ok tried tw2005 suggestions and results as follows:
when disconnecting the lead from the ysus to the lower buffer and also the interconnecting cable between the bottom buffer and upper buffer boards around one third of the screen goes black but has flickering green and red lines. When l do the same in reverse the picture stays almost identical to the original picture l posted. What can l try next? I can see no obvious damage to any of the buffer boards.
But just so I'm clear there is an upper and lower buffer board...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: LG50PC3D - help with image diagnosis.
Thanks for your guidance guys l will investigate and report back with the end result.
Leave a comment:
-
LG50PC3D - help with image diagnosis.
Hi Guys,
as per topic. This TV was in storage for a year or so. Initially the problem was it would turn on and then straight off. End result was a number of bad caps so l replaced the power supply and now this, so your thoughts appreciated see attached pic. Thanks in advance......
-
Re: New Members - please post your introductions here
Hi Guys, great site and information l'm Max cheers
Leave a comment:
No activity results to display
Show More
Leave a comment: