Re: Panasonic TC-P46S1 10 Blinks
No humming at all, before or after the fix. When it was doing the blinks, it would click on and then the blinks would start.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TC-P46S1 10 Blinks
Looked really good! Couldn't tell what the repair was.
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
Went ahead and tried the SC and all is well at the moment! Thanks sooooo much for the help!!!
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
Didn't realize you posted something else! Hope you had a great Christmas! SC board came in today and fixing to install it. I didn't see any physical anomalies on the buffer chips... The cheap multimeter I have doesn't beep so testing the continuity cam be tedious. So I'm hoping that the buffers are fine. If I still have a problem after I install the SC board then I'll have to go get a better multimeter.
I didn't pull the heatsinks off but looked on the backside and no burnt spots or anything out of the ordinary...Last edited by excelsisba; 12-26-2013, 08:10 PM.
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
I followed that flowchart and looks like the SC board and not the SS or A so I did the swap thing on ebay and shipped it out today.
Here's another pic.
...
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
I also found this piece laying around. Not sure where it came from or if it's even from my TV......
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
I found that guide!!! Thanks! I had the technical guide for the TC-P46S1 but it was a little vague...
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
I think I'm going to do that after I confirm a bad SC board. If it is a bad SC board, does that mean something in the P board is causing a bad SC board?
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
Thanks! If it is indeed an SC board, I found a trade in thing on ebay where you send yours in and they send you a rebuilt one. Are those reliable or sketchy?
Leave a comment:
-
Re: Panasonic TC-P46S1 10 Blinks
Which guide did that flow chart come from?
Leave a comment:
-
Panasonic TC-P46S1 10 Blinks
Hey guys, new here... I have a TC-P46S1 and have become yet another victim of the 10 blinks. Anyhow, I've done a little searching and trouble shooting already. So here is where I'm at:
1. Watching TV and the it goes black the other day with 10 blinks.
2. Tried the reset by holding the button for 10-20 secs, light stays solid for a little while but goes back to blinking. TV didn't come back on at all.
3. Unplugged SC2 and SC20 and now have 6 blinks.
4. Also checked the fuses on the P-Board F352, F501, F601, F602 and F603 and were fine but couldn't find F201.
...Last edited by excelsisba; 12-19-2013, 11:51 PM.
No activity results to display
Show More
Leave a comment: