Re: Sharp Aquos LC-60LE810UN troubleshooting



i havent changed any thing as of the way they are ran,so i assume so. to save money my friend said the heck with buying a new board so he went and bought a light rope and used the power cord and did a straight hard wire for the 2 top leds and the 2 bottom leds,but the ones on the side he ran in a series as it had less smds on them so they were getting way to hot. jerry rigged but saved him 250$ lol...

Re: Sharp Aquos LC-60LE810UN troubleshooting

ok every one i have fount the problem!!!!!!!!!!! you may have 1 or 2 bad smd's that may have went out but i have 2 of theses tvs bot had the one long one short. bought power/inverter board didnt work. replaced bad smds didnt work. so i went on ebey and bought a high led inverter tested lights in both sets work like a charm. mind you i only replaced one bad smd on only one of the sets as the other had no bad smds. so with the one that had all smds working i replaced power board and it still didnt work bypass the error by pressing vol -...

Re: Sharp Aquos LC-60LE810UN troubleshooting



has any one figured out how or why after replacing bad smds tv still does sam code...

Re: Sharp Aquos LC-60LE810UN troubleshooting



what should it read?...

Re: Sharp Aquos LC-60LE810UN troubleshooting

i found this video on the CCFL tube and a good possibility to hopefully help some one out. hope it works,i havent got a chance to try it yet. [url]https://www.youtube.com/watch?v=6YC6_Jog7YA[/url]Re: Sharp Aquos LC-60LE810UN trouble...6_Jog7YA[/url]

Re: Sharp Aquos LC-60LE810UN troubleshooting

also i would like to know what the meter should spike at when im testing the L1 and L2 leads as im not getting any thing,which either the board is bad or im testing it wrong.

Re: Sharp Aquos LC-60LE810UN troubleshooting



see what i did is hold vol - channel + and power(while pluged in) it then bypassed the 1 long 1 short error followed by a quick flash. i can then take a flashlight to the screen and see the picture. i have been doing some research and have found that it very well could be the psu/inverter board as i have just order 1 on ebay for 90$. if that doesnt work i found a web site that has led back light and lamps............ [url]http://www.ccflwarehouse.com/[/url]Re: Sharp Aquos LC-60LE810UN trouble...<br /> <br />...

Re: Sharp Aquos LC-60LE810UN troubleshooting



so does that mean the lcd/led screen is still good. as i do get a flash when i perform this?...