Re: Planar PL2010M-BK -Black screen
It was my understanding that the fuses read open or close, 0 is open good and 1 is closed bad... or vice versa.... there was a guy on youtube explaining it. If the two identical fuses read different one must be bad! i hope
[url]http://www.youtube.com/watch?v=vgn1fN4ixacb[/url]
I was just following his example =) I just am trying to find where to order a inverter board or some fusesRe: Planar PL2010M-BK -Black screen<... good and 1 is
bbrtoluch
New Member
Last Activity: 12-09-2013, 12:18 PM
Joined: 12-08-2013
Location: redding, Ca
-
Re: Planar PL2010M-BK -Black screen
I know this has been dead for a few years, however, where did you purchase this F2 Fuse at, and what type of tools do you need to replace it?
Ive got the board apart and measured the resistance across the fuse1 and fuse2... fuse one gets a 0 reading (good) and fuse2 gets a 1... so I am fuguring i need to un-soldering and solder a new fuse on...
Thanks for your time and help!Leave a comment:
No activity results to display
Leave a comment: