Re: Panasonic TC-P42GT25
I do not have one of those potentiometers. With that said how can I test other boards to make sure they are working so i just order SC and not waste money on just that board if it doesn't work?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: Panasonic TC-P42GT25
Q16661 RJP63F3A --- 016 cont beep
Q16402 DG3D5020 --- starts off around 16 then drops to 000 cont beep
Q16403 DG3D5020 --- 015 cont beep
Q16421 DG3D4020 --- 011 cont beep
Q16422 DG3D4020 --- 005 cont beep
Q16621 30F125- no beep, multimeter shows 1. ... this appears to have a lot of resistance because all of my ohm tests give a 1 except for what I think is the highest setting gives a reading.
Anyway to test one of the other boards to make sure that its not just the multimeter being faulty? Is there something on the...
Leave a comment:
-
Re: Panasonic TC-P42GT25
Got the meter in September of this year.
Leave a comment:
-
Re: Panasonic TC-P42GT25
This appears to be a video of someone using a very similar multimeter... looks just like mine.
[url]http://www.youtube.com/watch?v=BCd1nk1b5AY[/url]
I get a reading of 015 and its a continuous beep.
When I touch the red and black leads together without anything else touching its a continuous beep and shows 0.Re: Panasonic TC-P42GT25<br /> <br ...1nk1b5AY[/url]...Last edited by mpj31; 12-21-2013, 11:24 PM.
Leave a comment:
-
Re: Panasonic TC-P42GT25
Is this how I should be measuring SC2?
[url]https://www.dropbox.com/s/5gf2gphudis9z65/2013-12-21%2021.19.54.jpg[/url]
Again I get about 315.. which is close to your 300 number you were saying.
This changes nothing. Still SOS1 or SOS10 if I hold down power button.
Not sure how to test the IGBT's but I found your thread which helps locate them... any tips?
[url]https://www.badcaps.net/forum/showthread.php?t=22610[/url]
EDIT: Ok so...Last edited by mpj31; 12-21-2013, 08:49 PM.
Leave a comment:
-
-
Re: Panasonic TC-P42GT25
What is the resistance supposed to be?
Not sure where to go next. Is there any possibility its not the SC board? If its the SC board should I just try to replace it? How much are these things anyway?
I was reading through this...
[url]http://www.justanswer.com/electronics/2j10f-panasonic-plasma-tv-model-th-42pz77u-failed.html[/url]
would it be smart to do the voltage test this way?
If I put the black lead on a screw as a ground and then test the white metal pin on the WHITE side (right...Last edited by mpj31; 12-18-2013, 11:17 PM.
Leave a comment:
-
Re: Panasonic TC-P42GT25
Ok here are the pictures requested. All different readings depending on the setting used ranging from 200 to 2000k.
[url]https://www.dropbox.com/s/ws235u0s2avgnbd/2013-12-17%2019.07.10.jpg[/url]
[url]https://www.dropbox.com/s/ayj68bnx17qee8w/2013-12-17%2019.07.25.jpg[/url]
[url]https://www.dropbox.com/s/faoun2n6i7jxn9e/2013-12-17%2019.07.40.jpg[/url]
[url]https://www.dropbox.com/s/lhfr56yuvdbmlvl/2013-12-17%2019.07.53.jpg[/url]
[url]https://www.dropbox.com/s/bk6hutcbngm4yw0/2013-12-17%2019.08.05.jpg[/url]...Last edited by mpj31; 12-17-2013, 08:22 PM.
Leave a comment:
-
Re: Panasonic TC-P42GT25
The guide I used was posted by you in another thread back in July or so. I can't seem to locate it anymore. It said to do a few things and I said "Hey, that looks like mine on the same board, so lets see what happens". It then proceeded to say to unscrew some things and I did not go as far as that yet.
As far as reconnecting SC2...
Without it connected I get about 314 on a 2000 setting, 192 again on a 200 setting.
Upon reconnecting SC2 I'm back to SOS1, not 4. I'm not sure why I saw 4 at one time...
Leave a comment:
-
Re: Panasonic TC-P42GT25
Yes, sos7 is what I got, assuming I got the ribbons back in correctly. my meter goes 200 to 2000kLast edited by mpj31; 12-16-2013, 02:58 AM.
Leave a comment:
-
Re: Panasonic TC-P42GT25
You want me to connect everything except SC2 and give it a shot?
Leave a comment:
-
Re: Panasonic TC-P42GT25
Hopefully you dont mind me linking to my dropbox so I don't have to readjust the pictures. Here are some high-res shots.
Again when I test resistance as you described with TV off, with the multimeter in the position shown in picture 2, I get a reading of around 193.~.
To confirm what you probably already know this is a 42 inch 3d television purchased around Sep 2010. Lot of money spent on this to see it die in 3 years.
[url]https://dl.dropboxusercontent.com/u/5223162/TV%20001.JPG[/url]
[url]https://dl....
Leave a comment:
-
Re: Panasonic TC-P42GT25
Ok I plug everything back in that you had me unplug earlier. Then you want me to test resistance of SC2 while the TV is plugged in and turned on?
I have a multimeter... where does the red end go and where does the black end go. Sorry, learning here...
Edit:
Ok so without turning the TV on and everything still disconnected I did as follows and touched the two metal parts. Shown in pic below is somewhat what I did although the red is not touching in my picture.
I get a reading of 193.~ on the multimeter...Last edited by mpj31; 12-15-2013, 05:10 PM.
Leave a comment:
-
Re: Panasonic TC-P42GT25
Ok well I did what you told me by disconnecting everything and we have something to report at least. Not sure what you were looking for, but I ended up getting a steady red LED. What should I try next?
[url]https://www.dropbox.com/s/ssyaxpt4x34yoy5/2013-12-15%2013.16.22.jpg[/url]Re: Panasonic TC-P42GT25<br /> <br .../> [url]https:
Leave a comment:
-
Re: Panasonic TC-P42GT25
ill Try What you Recommended And Get Back To You. I Will Comment That I Plugged Sc2 Back In And Booted Up Tv TO Make SUre I Could See Lcd Blinking And I Got SOS4 Instead Of 1.
On My Phone, Hence The Odd capitalization Of Text.
Leave a comment:
-
Re: Panasonic TC-P42GT25
Well I got it open. What is next?
[url]https://www.dropbox.com/s/dwvhb7807jwlo1h/2013-12-14%2016.22.34.jpg[/url]Re: Panasonic TC-P42GT25<br /> <br ...2.34.jpg[/url]
Leave a comment:
-
Re: Panasonic TC-P42GT25
I've never done any electronics repair... most I've ever done is built a PC. I think I understand all this and will try tonight and see what happens. I do have a meter, not sure exactly what to do with it.
And yes the LED light on the front of the TV flashes 1 time red on a constant basis. If I hold Power button it then does 10 flashes...
Leave a comment:
-
Re: Panasonic TC-P42GT25
Sorry to be more specific. The TV does not turn on and I do not get picture, I do however hear a couple clicks as I have always heard, whenever I turn it on, and then the screen remains black. I do get power to the TV. The LCD red power light just blinks. "I turn it on and it has 1 blink... then I hold power and get 10 blinks."
Does that help?
Leave a comment:
-
Panasonic TC-P42GT25
After reading many threads and a lot of Google searching I still cannot find where to start on repairing my Panasonic Plasma, Model TC-P42GT25. I turn it on and it has 1 blink... then I hold power and get 10 blinks.
Best thread I can find similar might be this:
[url]https://www.badcaps.net/forum/showthread.php?t=28207[/url]
No solution found. Seems as if its probably the A board. Could I then just order an A board on ebay and see how it goes? Doesn't look too outrageously expensive?https://After reading many threads a...ll cannot find
No activity results to display
Show More
Leave a comment: