Re: Identifying Proper Replacement Caps...?
Replaced the who enchilada... and it works perfectly! Got lucky... I had nothing to practice on, so my first cap was done live!
My soldering iron is old and bent to crap and I used plumber's flux paste... but it works. And it even looks like I knew what I was doing.
One question; There was one cap that was horizontal... I put it in vertical... big deal? There are no clearance issues or anything else that would show this as being a problem...
cprince
New Member
Last Activity: 09-08-2013, 11:20 PM
Joined: 01-09-2009
Location: Gatineau Hills - Canada
-
Re: Identifying Proper Replacement Caps...?
I looked at those... but I noticed that the ripple and the impedance was no where near the KZE. That was what I thought I should base my replacement choice on......Leave a comment:
-
Re: Identifying Proper Replacement Caps...?
Origionals:
CapXon Gl series
Original:
3x 10x16
C352
GL105c
10v
1000uF
1010 Ripple
0.072 Impedance
Replacement:
United Chem - KZE series
[url]http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=565-1646-ND[/url]
1430 Ripple
0.038 Impedance
10@ $4.03
-----------------
Original:
2x 10x16
C350
GL105c
Vent
...Leave a comment:
-
Re: Identifying Proper Replacement Caps...?
Good man PCBONEZ!
I have been messing around going between the data sheet and digikey's website trying to figure this all out..
The only things (I think) that I am not certain about is the "Series". Does this matter? I would think that the "GL" series is a proprietary thing. That being said, then series doesn't matter much... right?
The other is the impedance translation; On the spec sheet at CapXon, my Cap 220uF rated 25volt 8x11.5 gives me 0.125 impedance. How does that...Leave a comment:
-
Re: Identifying Proper Replacement Caps...?
You know... I am not feeling any brighter.
I see some possibilities of what I am looking for through the process of elimination... but I am really not certain.
I have no idea what the impedance is on these caps... I do not know what ripple is nor how to find out what ripple I need.
I appreciate showing me the link to the data sheet, and I am not looking to be spoon fed... but I am lost. I didn't know that there was so many variants between caps.
CraigLeave a comment:
-
Identifying Proper Replacement Caps...?
Hello all!
Awesome site! You guys are all awesome with your self sufficiency and obvious bravery in sticking a 450C chunk of metal in your sensitive and often expensive electronic bits!!!
Love it!
I am working on an IBM ThinkVision 19 inch LCD monitor. I got it for free from work.
The symptoms;
Plug it in to the wall and the unit's "splash screen" (It says IBM ThinkVision when the monitor powers up) strobes slowly; one image pulse for about a half second every 5 or 7 seconds.
Makes no difference if there...
No activity results to display
Leave a comment: