Re: LG W2453V Picture Dies After 2 Seconds
Ok, as for the LED it has a driver so think i only need to step down the voltage and it should work.
As for cutting the jumpers at B+ where is that after the cap near the transformer? Iam new to all this sorry for the newb questions ^^
Thx for all the help appreciate it...
N3trox
New Member
Last Activity: 12-09-2016, 05:23 PM
Joined: 11-30-2013
Location: Stockholm
-
Re: LG W2453V Picture Dies After 2 Seconds
So if i find a connection that gives out 12-19V can i just solder the positive wire to that point and then the ground to the nearest one ?
About the Cap i knew that its max is 16v if it measures 12-16V can i just solder the positive to the caps positive and be done with it or do i need to cut the connection there or something else before?
Thank you for the help Davi.pLeave a comment:
-
Re: LG W2453V Picture Dies After 2 Seconds
ok its been a while finally found the problem 2 of the CCFL where dead so iam now planning to convert to led for the fun of it to just see how it will workout.
Now i need your help to figure out where i can "steal" 12-19V since thats what the driver needs to function there is a Capacitor that is rated 16V (the 4 caps next to eachother) can i just solder my + wire to it and ground to any ground and be happy with it ?
Sorry for double postingLeave a comment:
-
Re: LG W2453V Picture Dies After 2 Seconds
Sry to bump this up but i got the same screen with the same problem no caps visualy busted brown under transformer.. did you find what was wrong with it?
I just opened mine so gonna try and test see if i can find the problem iam new to testing components but iam here to learn ^^Leave a comment:
No activity results to display
Leave a comment: