Re: Vizio XVT553SV Power up problems
Here is a closer pic...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Vizio XVT553SV Power up problems
I also found ones at
0.465k and 24.0k
Leave a comment:
-
Re: Vizio XVT553SV Power up problems
I have 2 resistor at hand. They read
9.95K and 3.3K Would they work?
Leave a comment:
-
Re: Vizio XVT553SV Power up problems
The readings were the same for before and after pressing the power switch.
Pin 1: 2.1v
Pin 4: 5.17v
Pin 5: 5.17v
Leave a comment:
-
Re: Vizio XVT553SV Power up problems
It reads 5.17v before and after the switch is pressed.
Leave a comment:
-
Re: Vizio XVT553SV Power up problems
I do own a multi meter. I have also attached the photos. Thank you....
Leave a comment:
-
Vizio XVT553SV Power up problems
Hello everyone. I have had this TV for a few years and it has given me a lot of trouble. It has been replaced by the factory once while under warranty and then a year after it was replaced that unit went black. I had a company repair the TV. They installed a new main board and I think the T-con. Now it has gone black again. It stays in the standby mode and will not fully power up. The little vizio light on the front stays an amber color and pulse's to a dim amber after hitting the power switch. It should light up bright white. Does anyone have any ideas for me. Thanks in advance.
-
Re: New Members - please post your introductions here
Hello All. My name is Andrew, from Pennsylvania. I am an Electrician by trade, not very familiar with electronics (DC Voltage) though. I have a few little projects that I wanted to attempt to learn a few things about and I thought this would be a good place to start with some reading. Thank you.
Leave a comment:
No activity results to display
Show More
Leave a comment: