Re: Ue65f9000
Hi thank you, yes I have read it and is a confirmed main board however I can't find a replacement for less than £400, I could probably repair the mainboard if I knew why it was doing it, but haven't' got much on it to be fair.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Ue65f9000
Hello, I wonder if anyone could shed some light in the repair to the mainboard for this tv please, the mainboard is a bn41-01950c and also has a one connect box, after the apps logo is displayed the tv becomes unresponsive and the red led flashes in the bottom right hand corner of the tv, it then starts again and does the same, if it is this board at fault then does anyone know what the fault is with it
As I can't find a replacement in the uk.
Thank you.
-
42lv450u lg settings for lg panel instead of AUO
hello people, does anyone have the settings for the mainboard to change the settings from an AUO panel to an lg panel as the current AUO aettings have turned the image upside down and I don't have the settings for the lg and cannot find a replacement board
-
42lv450u Settings change for panel
hello all, I have this TV and upon putting the mainboard in the image is upside down, does anyone know how to alter it?
-
-
LG 4v450u change panel
Hello, can someone please help me, have this TV and had to put a new mainboard in however the screen must have been different in the other TV as the picture is upside down, looked in the in start menu and still cannot find how to change it. Thanks in advance.
-
37lg3000 no display
wonder if anyone can help, have a 37lg3000za, the Tv powers up and the backlight comes on however no image is displayed, mainboard and tcon have been changed yet I still have no image.TIA.
-
Sharp lc32dh500e
hi all, having trouble with the Tv, it has no tcon because it's in the main board, getting a backlight on but no video, changed the main board but still have no video, anybody have any ideas? Thank you in advance.
-
-
Ps42q96hd plasma.
Hi all, wonder if I could get some help with the above Tv, the power supply is BN44-00161a, replaced bulging caps and got it working however the transformer in the upper middle (ACE 2 42VS) has a fast ticking noise coming from it, I think it is a faulty transformer but using the code off the part I am unable to find any information on it, has anyone got any input on it?
-
Re: samsung plasma problem.
Hi tom yes the blinking does change it slows down.
Leave a comment:
-
Re: samsung plasma problem.
No distortions at all, got as far as going in to the menu.
VOltages all test present and correct they go to the levels they should and then start to decrease.
Leave a comment:
-
samsung plasma problem.
HI I wonder if anybody could help with some advice please, I have a ps43f4500, when I plug the power in the screen flashes and then goes off, if I do get the tv on it stays one for around 30 seconds and goes off.
When that happens the power led gives an intermittent blinking.
-
Re: Baird x32dtv
So there are 5 12v altogether did u put 2 on 1 and 30 on the other?
Leave a comment:
-
-
-
Re: Baird x32dtv
On the old board there was 2 vadj pins 12v and 2 grounds where did u attach this?
Leave a comment:
No activity results to display
Show More
Leave a comment: