Re: Vizio va320m no picture

where is that located

Re: Vizio va320m no picture

sorry it took me so long been very busy lately. the connector is labeled cn902. next to the connector is has the voltages labeled for each of the wires on that connector and i have checked all of them and all are getting proper voltage

Re: Vizio va320m no picture

ok where do i check for that signal at

Re: Vizio va320m no picture

i plugged up a dvd player and double checked with the flashlight and still nothing. i check that large black cap and it was getting 395VDC. and the backlight dosent come on at allnot even for a second

Re: Vizio va320m no picture

there was no input on the screen and here are some photos. thank you for responding.


[URL=http://imageshack.com/i/jo2hgvj][/URL]
[URL=http://imageshack.com/i/1naj4dj][/URL]
[URL=http://imageshack.com/i/0amkmrj][/URL]
[URL=http://imageshack.com/i/j53of3j][/URL]
[URL=http://imageshack.com/i/1feofxj][/URL]
[URL=http://imageshack.com/i/5bx4lqj][/URL]Re: Vizio va320m no picture

there was no input on the screen and here are some photos. thank you for responding.

so i have a vizio va320m that appears to have a backlight issue. ive read a similar forum and have applied the trouble shooting to my tv but to no avail.

when i power the tv on the vizio light goes from amber to white but there is no picture. i put the tv in a dark room and shined a flashlight on and and saw nothing. i then checked for the proper output voltages on the power supply and all of the wires had the appropriate voltage for what was stamped on the board.

at this point im am not sure where i should do. Any advice would be greatly appreciated

Re: New Members - please post your introductions here

hi i have a broken tv i found in an alley