Re: Intel DQ35JOE Leaking KZJ caps
Thanks, I'll try that. Not sure if they will take it since I don't have my receipt handy, but worth a shot.
Keeping with the board recap, I think I'll just stick to regular caps, I don;t want to go too off-spec.
So just to confirm, are these correct replacements for the 1800uF 6.3V KZJ, 470uF 16V KZG and 680uF 16V KZG respectively? Price isn't a huge deal if it goes a few dollars either way, shipping still costs more than the parts for me.
Nichicon HN 6.3v 1800uF 8X20mm
Nichicon HN 16v 470uF...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Intel DQ35JOE Leaking KZJ caps
Hello everyone,
I have an intel motherboard that has 3 leaking 1800uF 6.3V KZJ caps near the ATX connector, and from reading this forum I have found out that the replacement for these would be the Nichicon HN 6.3v 1800uF 8X20mm caps.
However, I was wondering if it would be ok to use poly caps instead, particularly the Nichicon LG Polymer 6.3v 1800uF 10X13mm.
I also noticed this board has 5 KZG caps (470uF and 680uF 16V) which from what I gather here, should also be replaced. What would suitable replacements for these be? Looks like the 470uF ones would be...
No activity results to display
Show More
Leave a comment: