Re: Problem with a Panasonic TH-42PZ80b
would you be able to link me to one that ill need and is that it or do i need a SD board as well
laurence1023
Member
Last Activity: 02-25-2014, 11:29 PM
Joined: 11-10-2013
Location: Great Dunmow
-
Re: Problem with a Panasonic TH-42PZ80b
I disconnected it all like it said on the guide then it didn't get the 7 blinks so i reconnected the SD board and then it went bang the TV powered down so i unplugged it checked it then plugged it back in and got 7 lightsLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Yeah i made sure the isolating crocodile clips wasnt touching anything and yeah AC...Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
What do you mean?Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
I went through the guide again and i didn't get the 7 blinking lights and a picture came up and ill attach it at the bottom and so i reconnect the SD board like it said and it went bang and i said ahh crap and now i get the 7 blinking lights so i take it i will need to replace the SD board now Thanks Laurence...Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
thats with all the boards connectedLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
ive double checked to make sure i have connected everything and it still blinks 7 red lightsLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
It still doesnt work
Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Thank you tom!Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Yeah i got the seven blinks then i disconnected the sc2 and sc20 and then the green light flashed for about 3 secs then the light stayed green so it means the SC Board is gone?Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Yep i did aha the two codes that are on the SC board is T TXNSC1RLTB the other one i have on their is 16060803272Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Thank you Tom it is the SC Board that is gone where could i get one off these boards for cheap? Thanks againLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Here you go...Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
I have the picture on my laptop how do i post it on here?Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Hey Tom i have the jumper cable i need with two crocodile clips i can see where to put one end on the screw but i can see where i put the other end it doesn't seem to connect anything on the picture?Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
thanks manLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
one more question what cable do i need to do the isolation thingLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
ok thank you Tom speak to you soonLeave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
I went to slide number 20 and followed the instructions and disconnected the connectors and didnt do the jumper bit but i went to slip number 21 and followed
Physically disconnect the SU board and the
SD board. (See instructions on previous
slide). Plug in the TV and turn it on
Done
Does the
TV shut down
and the power
LED
blink 7 times?
Yes
With the SU board and the SD board
still disconnected, remove connectors
SC2 and...Leave a comment:
-
Re: Problem with a Panasonic TH-42PZ80b
Thank you Tom for the guide i have found it is the SC board that needs replacing is this the right SC board for my Panasonic TH-42PZ80B
http://www.ebay.co.uk/itm/3008508354...84.m1438.l2649
Thank you again i really do appreciate the helpLeave a comment:
No activity results to display
Leave a comment: